* Plumb new checkpoint API through to VDDK importer.
Signed-off-by: Matthew Arnold <marnold@redhat.com>
* Add incremental data copy from VDDK.
Create a new data source implementation similar to vddk-datasource, but
only for blocks of data that changed between two snapshots. Also factor
out common things between the two VDDK data sources.
Signed-off-by: Matthew Arnold <marnold@redhat.com>
* Check block status for warm and cold imports.
Addresses a bunch of runtime issues, but progress tracking isn't right.
Signed-off-by: Matthew Arnold <marnold@redhat.com>
* Find snapshots correctly.
Signed-off-by: Matthew Arnold <marnold@redhat.com>
* Remove separate warm/cold VDDK importers.
Signed-off-by: Matthew Arnold <marnold@redhat.com>
* Advance through the checkpoint list in the spec.
Move DataVolume to Paused after each checkpoint, and start a new
importer pod for the next available checkpoint. Keep track of which
checkpoints have been copied by adding PVC annotations associating each
checkpoint with the UID of the pod that copied it.
Signed-off-by: Matthew Arnold <marnold@redhat.com>
* Allow spec updates to drive multi-stage imports.
A multi-stage import can create checkpoints at any time, so CDI needs to
be able to receive updates to the list of checkpoints. Implement this by
allowing spec changes only for fields related to multi-stage imports.
Signed-off-by: Matthew Arnold <marnold@redhat.com>
* Avoid deleting destination in multi-stage import.
A multi-stage import will have an initial data copy to the destination
file followed by separate copies for individual deltas. The destination
file should not be deleted before starting these delta copies.
Signed-off-by: Matthew Arnold <marnold@redhat.com>
* Get VDDK data source to pass formatting tests.
Signed-off-by: Matthew Arnold <marnold@redhat.com>
* Unit tests for multi-stage import admission rules.
Make sure only updates to checkpoint-related fields are accepted.
Signed-off-by: Matthew Arnold <marnold@redhat.com>
* Add warm import unit tests for VDDK data source.
Signed-off-by: Matthew Arnold <marnold@redhat.com>
* Add VDDK warm import functional test.
Put two snapshots in the vCenter simulator inventory, and run them
through a multi-stage import process. Also clean up some issues
reported by test-lint.
Signed-off-by: Matthew Arnold <marnold@redhat.com>
* Add some documentation about multi-stage imports.
Signed-off-by: Matthew Arnold <marnold@redhat.com>
* Pass existing multi-stage DataVolume unit tests.
Also remove MD5 sum step used for debugging, since it can take a long time.
Signed-off-by: Matthew Arnold <marnold@redhat.com>
* Remove tabs from documentation.
Signed-off-by: Matthew Arnold <marnold@redhat.com>
* Pass failing import-controller unit test.
Signed-off-by: Matthew Arnold <marnold@redhat.com>
* More unit tests for multi-stage field updates.
Also factor these tests into a DescribeTable.
Signed-off-by: Matthew Arnold <marnold@redhat.com>
* Add nbdkit retry filter.
Available as of Fedora 33 update.
Signed-off-by: Matthew Arnold <marnold@redhat.com>
* Give correct file name to nbdkit in more cases.
The backing file in the spec might not always match the backing file in
the snapshot, so try harder to match those files by disk ID. May still
need to allow updates to backingFile, depending on how this gets used.
Signed-off-by: Matthew Arnold <marnold@redhat.com>
* Add more unit tests for datavolume-controller.
Signed-off-by: Matthew Arnold <marnold@redhat.com>
* Fix linter error from last commit.
Signed-off-by: Matthew Arnold <marnold@redhat.com>
* Add unit tests for some govmomi API calls.
Move original calls into mock interfaces to make this work.
Signed-off-by: Matthew Arnold <marnold@redhat.com>
* Add an API for disabling smart-cloning.
We used to detect the possibility of smart-cloning and always use it
if it's there. This might not be the desirable behaviour if:
- Snapshots cost more money than a host-assisted clone
- Snapshots are broken
The API is:
kubectl edit cdi
cdi.Spec.cloneStrategyOverride = "copy"
If no value is chosen, we continue with the existing behaviour of
preferring smart clone if possible.
Signed-off-by: Maya Rashish <mrashish@redhat.com>
* Remove redundant parentheses, don't open code GetActiveCDI
Signed-off-by: Maya Rashish <mrashish@redhat.com>
* Add const CloneStrategySnapshot to v1alpha1 too
Pointed out by awels, thanks.
Signed-off-by: Maya Rashish <mrashish@redhat.com>
* Add unit tests for getCloneStrategy
Signed-off-by: Maya Rashish <mrashish@redhat.com>
* Add checkpoints to DataVolume CRD and reconciliation
* Add Previous, Current, and FinalCheckpoint to DataVolume CRD
* Use checkpoints to set annotations on the PVC
* If an importer pod succeeds while checkpoint annotations are set,
then set the DataVolume status to Paused intstead of Succeeded.
* Clear the PVC checkpoint annotations
Signed-off-by: Sam Lucidi <slucidi@redhat.com>
* Add new fields to DataVolume CRD creation
Signed-off-by: Sam Lucidi <slucidi@redhat.com>
* Generate updated code for the DataVolume changes
Signed-off-by: Sam Lucidi <slucidi@redhat.com>
* Add tests for multistage import annotations
Signed-off-by: Sam Lucidi <slucidi@redhat.com>
* Add library function to determine if a PVC has been populated fully.
The logic is as following:
If PVC has no ownerRef, then we assume something else fully populated it and
will return true
If PVC has an ownerRef and its a DataVolume, then look up the DataVolume
If DV.status.Phase == succeeded, return true, return false otherwise.
Signed-off-by: Alexander Wels <awels@redhat.com>
* Renamed functions to better indicate its purpose.
Signed-off-by: Alexander Wels <awels@redhat.com>
* Generate CDI CRD using controller-tools.
This is only done for CDI CRD as it requires the existence of source
code. Other CRDs we create are created by a more bare bones pod.
CDIUninstallStrategy was missing a comment describing it, so add
one. This was spotted manually so there might be more missing.
Signed-off-by: Maya Rashish <mrashish@redhat.com>
* Allow users to specify which nodes CDI pods will live on.
nodeSelector, affinity and tolerations are possible values.
This is done in the CDI CR (rather than CDIConfig) as we are
interested in having this field be populated by external operators.
Unit tests now require the existence of a CDI CR, so create it.
Signed-off-by: Maya Rashish <mrashish@redhat.com>
* Add a unit test covering some node placement functions
Signed-off-by: Maya Rashish <mrashish@redhat.com>
* Specify that all our pods are linux-only.
Signed-off-by: Maya Rashish <mrashish@redhat.com>
* Avoid duplicate test, accidental left over.
Pointed out by awels, thanks.
Signed-off-by: Maya Rashish <mrashish@redhat.com>
* Rename to cdiOperatorDeployment for clarity.
Suggested by awels
Signed-off-by: Maya Rashish <mrashish@redhat.com>
* Specify we only run on linux using the CDI CR, no need to embed this
into the code.
Signed-off-by: Maya Rashish <mrashish@redhat.com>
* Don't dereference workloadPlacement for no reason
Signed-off-by: Maya Rashish <mrashish@redhat.com>
* Split off operator test to have its own AfterEach, BeforeEach.
Use even more descriptive function names.
Do all the CDI delete/restore logic in AfterEach, to ensure that
it happens and restores the deployment with the original CR even
if the test fails.
Signed-off-by: Maya Rashish <mrashish@redhat.com>
* Remove XXX. This is the proper way.
Signed-off-by: Maya Rashish <mrashish@redhat.com>
* Adapt to latest changes in controller_test.go (renaming import)
Signed-off-by: Maya Rashish <mrashish@redhat.com>
* Simplify, not storing intermediate value.
Signed-off-by: Maya Rashish <mrashish@redhat.com>
* Don't dereference nodeplacement in callers to CreateDeployment
Signed-off-by: Maya Rashish <mrashish@redhat.com>
* Remove redundant save & restore. Unit tests do this for us.
Pointed out by awels, thanks.
Signed-off-by: Maya Rashish <mrashish@redhat.com>
* Split out "find toplevel" to a utility function
Signed-off-by: Maya Rashish <mrashish@redhat.com>
* Wait for the CDI CR update to apply before continuing.
Signed-off-by: Maya Rashish <mrashish@redhat.com>
* Simplify, not storing intermediate value.
Signed-off-by: Maya Rashish <mrashish@redhat.com>
* Make it clear that the chosen node placement will not be schedulable.
Signed-off-by: Maya Rashish <mrashish@redhat.com>
* update k8s deps to 1.18.6 and controller runtime to 0.6.2
Signed-off-by: Michael Henriksen <mhenriks@redhat.com>
* remove building code generators from docker image. This way the k8s ligray version only has to be updated in go.mod
Do more stuff in the bazel container. Faster and better interop
Fix unit tests
Signed-off-by: Michael Henriksen <mhenriks@redhat.com>
* make format
Signed-off-by: Michael Henriksen <mhenriks@redhat.com>
* remove unnecessary rsync
Signed-off-by: Michael Henriksen <mhenriks@redhat.com>
* redo code generator dep management
Signed-off-by: Michael Henriksen <mhenriks@redhat.com>
* builder uses go modules
Signed-off-by: Michael Henriksen <mhenriks@redhat.com>
consistent failed should never happen during normal operations,
it can potentially happen if a pvc claim is lost.
Signed-off-by: Alexander Wels <awels@redhat.com>
* Set the WaitForFirstConsumer phase on DataVolume when storage uses the WaitForFirstConsumer binding mode and is not bound yet.
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* Skip PVC if not bound in import|clone|upload controllers.
This is done so the VM pod(not the cdi pod) will be the first consumer, and the PVC can be scheduled on the same location as the pod.
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
fixup! Skip PVC if not bound in import|clone|upload controllers.
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* Update importer tests to force bind the PCV by scheduling a pod for pvc, when storage class is wffc.
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* Update datavolume tests to force bind the PCV by scheduling a pod for pvc, when storage class is wffc.
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* Update upload controller and upload tests to correctly handle force binding the PCV by scheduling a pod for pvc, when storage class is wffc.
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* Update clone tests to force bind the PCV by scheduling a pod for pvc when the storage class is wffc.
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* Update cloner multi-node tests to force bind the PCV by scheduling a pod for pvc when storage class is wffc.
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* Correct after automerge
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* Improve/simplify tests
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* Fix error in import test.
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* Update transport_test,operator_test.go
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* Update rbac_test.go and leaderelection_test.go
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* Improve Datavolume and PVC Checks for WFFC.
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* Handle wffc only if feature gate is open - import-controller
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* TEST for Handle wffc only if feature gate is open - import-controller - TEST
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* Handle wffc only if feature gate is open - upload-controller with test
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* rename and simplify checks
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* cleanup after rebase
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* update tests after rebase
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* update tests after rebase
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* more cleanups
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* Document new WFFC behavior
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* Document new HonorWaitForFirstConsumer option
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* update docs according to comments
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* extract common function, cleanup - code review fixes
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* add comment for another pr - 1210, so it can have easier merge/rebase
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* typo
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* Simplify getStoragebindingMode - code review comments
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* Add FeatureGates interface - code review fix
Additionally pass the features gates instead of the particular feature gate value,
and let shouldReconcilePVC decide what to do with the feature gate. That way shouldReconcilePVC
contains all the logic, and the caller does not need to do additional calls to provide parameters.
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* Update matcher
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* move upload.cdi.kubevirt.io API group to v1beta1
Signed-off-by: Michael Henriksen <mhenriks@redhat.com>
* move core api to v1beta1
Signed-off-by: Michael Henriksen <mhenriks@redhat.com>
* fix os-3.11 cluster sync and add functional tests for alpha api
Signed-off-by: Michael Henriksen <mhenriks@redhat.com>
* change more occurences of v1alpha1
Signed-off-by: Michael Henriksen <mhenriks@redhat.com>
* updates after rebase
Signed-off-by: Michael Henriksen <mhenriks@redhat.com>
* don't create snapshot or clone pods if pvcs in use
Signed-off-by: Michael Henriksen <mhenriks@redhat.com>
* cleanup pods during functional tests
Signed-off-by: Michael Henriksen <mhenriks@redhat.com>
* kill mmore pods blocking clone tests
Signed-off-by: Michael Henriksen <mhenriks@redhat.com>
* fix typos
Signed-off-by: Michael Henriksen <mhenriks@redhat.com>
* move from alpha to beta snapshot API
Signed-off-by: Michael Henriksen <mhenriks@redhat.com>
* fix broken clone tests
Signed-off-by: Michael Henriksen <mhenriks@redhat.com>
* don't generate snapshot client
Signed-off-by: Michael Henriksen <mhenriks@redhat.com>
* Add conditions to DataVolume and add condition annotation to PVCs
Signed-off-by: Alexander Wels <awels@redhat.com>
* Added reason codes to conditions
Updated functional tests to use reason codes
Fixed broken functional test.
Signed-off-by: Alexander Wels <awels@redhat.com>
* Added last transition time
Added documentation
Signed-off-by: Alexander Wels <awels@redhat.com>
* Switch to conditions slice from conditions pointer slice.
Signed-off-by: Alexander Wels <awels@redhat.com>
* Add heartbeat time for conditions.
Renamed AnnRunningCondition to AnnLastTerminationMessage
Only update reason/message on heartbeat or state change.
Signed-off-by: Alexander Wels <awels@redhat.com>
* Rename heartBeat to heartbeat
Re-factor datavolume-conditions to properly update heartbeat time.
Signed-off-by: Alexander Wels <awels@redhat.com>
* renamed AnnRunningConditionReason to AnnLastTerminationReason
Signed-off-by: Alexander Wels <awels@redhat.com>
* Revert lastTerminatedMessage/Reason rename
Added separate AnnScratchBoundCondition/Message/Reason for scratch space
Signed-off-by: Alexander Wels <awels@redhat.com>
* Update bound condition to take scratch or source PVC status into consideration.
Update running condition to take source pod status into consideration
Signed-off-by: Alexander Wels <awels@redhat.com>
* Addressed comments in review.
Signed-off-by: Alexander Wels <awels@redhat.com>
* Properly get scratch space pvc phase.
Signed-off-by: Alexander Wels <awels@redhat.com>
These are basically no-op DataVolumes for PVCs that already exist.
I see this mostly as an internal thing to facilitate VM restore from snapshot
Signed-off-by: Michael Henriksen <mhenriks@redhat.com>
* Clean up client-go left overs after converting to runtime library.
Clean unused functions from controller utils.go
Turn util_test.go into gingko test.
Moved functions from util to proper controller if only used by that controller.
Signed-off-by: Alexander Wels <awels@redhat.com>
* Don't export reconciler variables.
Signed-off-by: Alexander Wels <awels@redhat.com>
* Add a field to DataVolume to track the number of retries/pod restarts
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* Add a field to DataVolume to track the number of retries/pod restarts
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* Make RESTARTS non-empty on DataVolume (shows as as 0 'zero')
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* Test reporting restarts on DataVolume when importing.
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* Fix tests
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* Code review fixes
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* Restart Count status test for upload and clone controller
Signed-off-by: Bartosz Rybacki <brybacki@redhat.com>
* Update datavolume controller to use runtime controller library
Signed-off-by: Alexander Wels <awels@redhat.com>
* Update smart clone controller to use controller runtime library
Signed-off-by: Alexander Wels <awels@redhat.com>
* Mark smart cloned cloned PVCs are k8s.io/CloneOf
Signed-off-by: Alexander Wels <awels@redhat.com>
* Removed unused informer factories.
Fixed naming of controller from import to smart clone.
Ignore not found error on delete.
Signed-off-by: Alexander Wels <awels@redhat.com>
* Only delete snapshot if pvc is bound
Signed-off-by: Alexander Wels <awels@redhat.com>
* Update datavolume controller to use runtime controller library
Signed-off-by: Alexander Wels <awels@redhat.com>
* Fix connection refused check. It would cause errors to be returned constantly.
Signed-off-by: Alexander Wels <awels@redhat.com>
* baseline refactoring of webhook package
* datavolume clone validation webhook
* rename datavolumes/clone-init to datavolumes/source
* add RBAC doc
* updates from review
* make clone permission check exportable function
* force dumb cloning in in functional test
Changes and flow:
* datavolume-controller:
- When clone pvc is requested and smart-clone is applicable -> Create a new VolumeSnapshot.
* Introduced smart-clone-controller:
- Listens to VolumeSnapshot changes and create a new PVC based on the snapshot.
- Upon PVC successful creation, deletes the snapshot for cleaning up.
Change-Id: I369fc92e72edb8a2cf584c8cb916795415f9d6e0
Signed-off-by: Daniel Erez <derez@redhat.com>
Co-authored-by: Fred Rolland <frolland@redhat.com>
1. Follow the instructions for writing a release note from k8s: https://git.k8s.io/community/contributors/guide/release-notes.md
-->
**What this PR does / why we need it**:
This PR fixes an issue where the Data Volume Phase was not being updated properly where the source was a PVC instead of HTTP
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes#455
**Special notes for your reviewer**:
**Release note**:
<!-- Write your release note:
1. Enter your extended release note in the below block. If the PR requires additional action from users switching to the new release, include the string "action required".
2. If no release note is required, just write "NONE".
-->
```release-note
NONE
```
**
Signed-off-by: Alexander Wels <awels@redhat.com>
* Place cdi packages under the top level kubevirt.io project path
Signed-off-by: David Vossel <davidvossel@gmail.com>
* Change all references to cdi.io to cdi.kubevirt.io
Signed-off-by: David Vossel <davidvossel@gmail.com>
* Add go_import_path to travis config
Signed-off-by: David Vossel <davidvossel@gmail.com>
* update test package imports
Signed-off-by: David Vossel <davidvossel@gmail.com>
