* Support release/debug flavors of flutter_patched_sdk
* Use [anyNamed] instead of [any] for mocking named arguments
* Fix use of local engine in release mode
* Use source list from the compiler to track invalidated files.
* Revert accidental change
* Fix first-time-seen-the-file logic
* Fix/simplify invalidate logic now that we can rely on compiler to let us know what is the cut-off point for invalidation.
* Update devfs mock to accommodate for new fields
* Fix deleted files case
* Analyzer found missing final
* some space formattings
* always use blocks in if-else if a block is used
* format spaces in for and while
* allow multiline if conditions
* fix missing space
* add trailing commas on list/map/parameters
* add trailing commas on Invocation with nb of arg>1
* add commas for widget containing widgets
* add trailing commas if instantiation contains trailing comma
* revert bad change
These are essentially self-inflicted race conditions. Instead of timeouts we're going to try a more verbose logging mechanism that points out when things are taking a long time.
* Remove many timeouts.
These are essentially self-inflicted race conditions. Instead of timeouts we're going to try a more verbose logging mechanism that points out when things are taking a long time.
* Get the attach tests to pass.
* Apply review comments from Todd
* More review comment fixes
* Put back the extended timeouts here now that I know why we have them...
Subcommand output (gradle, adb, etc) is no longer wrapped, and wrapping notices when the terminal column width changes dynamically now.
Fixes#23267.
Fixes#23266.
`FlutterDevice.views` is limited by a filter. Pipe this filter up as an
option for the commands that instantiate `FlutterDevice`s. This is the
first change necessary for the CLI tooling to target specific isolates
(#22009).
More work needs to be done after this patch.
* Isolate names are dynamically generated and change every restart.
* This just filters views, not background isolates (`VMService.isolates`).
This attempts to re-land #22656.
There are two changes from the original:
I turned off wrapping completely when not sending output to a terminal. Previously I had defaulted to wrapping at and arbitrary 100 chars in that case, just to keep long messages from being too long, but that turns out the be a bad idea because there are tests that are relying on the specific form of the output. It's also pretty arbitrary, and mostly people sending output to a non-terminal will want unwrapped text.
I found a better way to terminate ANSI color/bold sequences, so that they can be embedded within each other without needed quite as complex a dance with removing redundant sequences.
As part of these changes, I removed the Logger.supportsColor setter so that the one source of truth for color support is in AnsiTerminal.supportsColor.
* Turn on line wrapping again in usage and status messages, adds ANSI color to doctor and analysis messages. (#22656)
This turns on text wrapping for usage messages and status messages. When on a terminal, wraps to the width of the terminal. When writing to a non-terminal, wrap lines at a default column width (currently defined to be 100 chars). If --no-wrap is specified, then no wrapping occurs. If --wrap-column is specified, wraps to that column (if --wrap is on).
Adds ANSI color to the doctor and analysis output on terminals. This is in this PR with the wrapping, since wrapping needs to know how to count visible characters in the presence of ANSI sequences. (This is just one more step towards re-implementing all of Curses for Flutter. :-)) Will not print ANSI sequences when sent to a non-terminal, or of --no-color is specified.
Fixes ANSI color and bold sequences so that they can be combined (bold, colored text), and a small bug in indentation calculation for wrapping.
Since wrapping is now turned on, also removed many redundant '\n's in the code.
* Allow passing a restart reason through to analytics
* Update to avoid overlaps with other code
* Remove TODO as this is the real live value
* Improve formatting + constant name
This turns on text wrapping for usage messages and status messages. When on a terminal, wraps to the width of the terminal. When writing to a non-terminal, wrap lines at a default column width (currently defined to be 100 chars). If --no-wrap is specified, then no wrapping occurs. If --wrap-column is specified, wraps to that column (if --wrap is on).
Adds ANSI color to the doctor and analysis output on terminals. This is in this PR with the wrapping, since wrapping needs to know how to count visible characters in the presence of ANSI sequences. (This is just one more step towards re-implementing all of Curses for Flutter. :-)) Will not print ANSI sequences when sent to a non-terminal, or of --no-color is specified.
Fixes ANSI color and bold sequences so that they can be combined (bold, colored text), and a small bug in indentation calculation for wrapping.
Since wrapping is now turned on, also removed many redundant '\n's in the code.
This changes the compiler output for gradle to be less verbose and more easily read.
This only applies to compilation error messages: other gradle messages will continue to print as before.
It also fixes a small problem with the performance measurement printing (see that "7.1s" on it's own line in the original?) so that if something is expected to have multiple lines of output, it prints an initial line, and a "Done" line with the elapsed time, so that it's possible to know what the time applies to.
It also updates the spinner to be fancier, at least on platforms other than Windows (which is missing a lot of symbols in its console font).
Addresses #17307
This adds support to AnsiTerminal for colored output, and makes all tool output written to stderr (with the printError function) colored red.
No color codes are sent if the terminal doesn't support color (or isn't a terminal).
Also makes "progress" output print the elapsed time when not connected to a terminal, so that redirected output and terminal output match (redirected output doesn't print the spinner, however).
Addresses #17307
This is a blocker for Google roll since we are not at dev4.0:
- Future is not yet part of dart:core.
- Future.sync().then<dynamic>... causes failure without the new keyword.
* Don't set the `vmServices` member variable until it's fully initialized.
* Add a timeout to the future that sends the 'started' event to the IDE
https://github.com/flutter/flutter/issues/16604
* Add a detach command to detach without terminating (#21376)
* Add a detach command to detach without terminating
Fixes#21154.
* Bump protocol version for app.detach
* Tweak to detach/quit text
* Change logPrefix to named param
* Fix the text that the devicelab attach test looks for
* Add a detach command to detach without terminating
Fixes#21154.
* Bump protocol version for app.detach
* Tweak to detach/quit text
* Change logPrefix to named param
* Start logger in startProgress to avoid assertion failure
There are lots of places that create a Status() and all but two of them call ..start() immediately. This is one of the places that doesn't, which causes an assertion failure when running with --enable-asserts and the other is in the same file (I suspect it's also incorrect, but possibly it's never used - I'll look at that separately when I can trace some code that calls it).
Fixes#20812.
* Enable asserts for tools tests
* Fix lint
* Rename enableAsserts -> enableFlutterToolAsserts
To make it clearer that it only enables asserts for flutter_tools when set.
Disallow calling stop() or cancel() multiple times. This means that
when you use startProgress you have to more carefully think about what
exactly is going on.
Properly cancel startProgress in non-ANSI situations, so that
back-to-back startProgress calls all render to the console.
Disallow calling stop() or cancel() multiple times. This means that
when you use startProgress you have to more carefully think about what
exactly is going on.
Properly cancel startProgress in non-ANSI situations, so that
back-to-back startProgress calls all render to the console.
* Extract some of startApp into a reusable method
* Get basic attach --machine working
* Attach --machine tweaks
Move validation to validate method and create daemon early so we get the startup event before trying to get a connection.
* Bump daemon version so we know whether it's valid to flutter attach
* Tweak output text
* Swap package imports for relative
* Review tweaks (naming, formatting, typedefs)
* Separate arguments from process spawning
This will make calling attach easier
* Add a basic test for flutter attach --machine
* Fix crash if port unforward modifies the list of forwarded ports
* Add a no-op port forwarder for flutter-tester
* Switch to using BasicProject instead of our own inline code
* Fix expectation in test now we have a portForwarder
* Remove stale TODO (this is done)
* Tweak formatting
* Change some Completers to void to fix Dart 2 issues
* Remove the 'app' domain from flutter daemon
By default the daemon won't register the "app" domain, you need to opt-in (which the 'run' command does, as well as the tests for the app functionality).
Fixes#6658.
* Tweak text
* Put restart/callServiceExtension/stop back into daemon mode
* Add a comment about removing discoverApps
fuchsia_tester.dart still assumes Dart 1. Previously, it ran tests directly
from source, flutter_platform.dart automatically runs a kernel compile when
operating in Dart 2 mode, but this assumes a functional Dart SDK is available
in the artifacts directly, and fuchsia_tester.dart mocks out the artifacts
directory with an empty temp dir.
Remaining work is:
1. Get the frontend server building as a dependency on Fuchsia.
2. Patch fuchsia_tester.dart to use a valid Dart SDK and frontend server.
This also reverts migration to Dart 2 typedef syntax.
This reverts commit 6c56bb2. (#18362)
This reverts commit 3daebd0. (#18316)
Now that Dart 1 is turned off, reapplying my change to turn on the prefer_generic_function_type_aliases analysis option, and fix all the typedefs to Dart 2 preferred syntax.
Also eliminated the unused analysis_options_repo.yaml file and turned on public_member_api_docs in analysys_options.yaml.
No logic changes, just changing the typedef syntax for all typedefs, and updating analysis options.
* It's time to #deleteDart1 (#18293)
Eliminates support for Dart 1 in flutter_tools, and drops our Dart 1
benchmarks. All commands now run in Dart 1 mode only.
Eliminates --preview-dart-2 / --no-preview-dart-2 support.
* Fix indentation, remove no longer necessary .toList()
* Only push udpated kernel if >0 invalidated srcs
Eliminates support for Dart 1 in flutter_tools, and drops our Dart 1
benchmarks. All commands now run in Dart 1 mode only.
Eliminates --preview-dart-2 / --no-preview-dart-2 support.
* Send an event at startup with the protocol version and pid
The pid will help with some of the issues of terminate the process when launched through a shell script and the version will allow clients to make decisions about supported features.
I've also bumped the protocol version number for two reasons:
1. This change
2. We didn't increase it when we added the previous emulator commands
* Add to Artifacts, and add optional arguments to entry points for flut… (#15185)
Add to Artifacts, and add optional arguments to entry points for flutter run and test to allow for wiring up the same with preview-dart-2 internally
* Changing packages uri here is not necessary
* Revert "Revert "Add android license verification to doctor and some refactoring" (#14727)"
This reverts commit d260294752.
* Add tests, fix sdkManagerEnv and use it consistently, and rearrange Status object model
* AnsiSpinner needs to leave the cursor where it found it.
* fix tests
* Const constructor warning only shows up on windows...?
* Avoid crash if we can't find the home directory
* Make pathVarSeparator return a string in the mock
* Implement review comments
* Fix out-of-order problem on stop
* Created plumbing but has stream problem
* testing with makePipe
* Trying pipe but not really getting anywhere
* works by repeatedly reading line
* Minor cleanup
* works
* Clean up pipe after use.
* Move the last status forward
* Make sure failed script commands bubble up
Reports from that commit included:
* Doctor hanging
* Doctor prompting to install JDK
* AnsiStatus.cancel() printing elapsed time and extra newline
* Printing extra spinner character at the end of each line
* Initial version, seems to work
* Unit test for android license checker
* Cleanups
* Windows analyzer wants const.
* Refinements to timeout
* review comments
* Forgot a nit
* Reject requests for hot reload if a hot reload is already in progress.
Fixes#14184
* Implement TODO, verifying further hot reloads complete sucessfully.
* Fix year on new file.
* Add missing type annotations to fix lints
* Add run_machine_concurrent_hot_reload to manifest for CI
* Reformat document
... but undo things that cause lints (like single-line ifs)
* Extract std stream transformations
* Make inProgressHotReload private
* Disallow all types of reload while hot reload in progress
* Simplify code handling in-progress hot reloads
