DDS was temporarily pinned to 4.1.0 because 4.2.0 triggered some test
failures (see https://github.com/flutter/flutter/pull/147250). Those
failures should be fixed by vm_service 14.2.2, so this unpins DDS and
rolls both of these packages (along with devtools_shared, which is a DDS
dependency).
(If the bot updates vm_service before this is done, I can rebase over
that will reduce the size of this PR to just a few files)
### Some background:
* Flutter registers the hot-restart service extension for all devices **except** web devices. For web devices, DWDS registers the service extensions.
* When a user is debugging their code via VS Code, the VS Code Dart extension [sends a hot-restart](94cb81c552/src/debug/run_daemon_base.ts (L100)) request via stdin/out to flutter_tools
* flutter_tools then [calls the "hotRestart" service extension](f3978c7a46/packages/flutter_tools/lib/src/isolated/resident_web_runner.dart (L447)) (which, again, has been registered by DWDS)
### Why is this change necessary?
In DWDS, we are changing how we register the "hotRestart" service extension (here is the PR for that: https://github.com/dart-lang/webdev/pull/2388). Previously, we registered the "hotRestart" service extension on a client that was directly connected to the VmService. With https://github.com/dart-lang/webdev/pull/2388, we will be registering the "hotRestart" service extension on a client that is connected to DDS.
When a service extension is registered against DDS, DDS adds a prefix to the service extension method name (e.g. "hotRestart" becomes "s0.hotRestart"). It informs clients of the service extension name via `kServiceRegistered` events sent to the `Service` stream.
Therefore, this change simply listens to those service extension registered events, and uses them to determine the "hotRestart" service extension's method name.
Part of #137040 and #80374
- Extracted getting plugin implementation candidates and the default implementation to its own method
- Extracted resolving the plugin implementation to its own method
- Simplify candidate selection algorithm
- Support overriding inline dart implementation for an app-facing plugin
- Throw error, if a federated plugin implements an app-facing plugin, but also references a default implementation
- Throw error, if a plugin provides an inline implementation, but also references a default implementation
Fix dependency tracking in the build.
* https://github.com/flutter/flutter/issues/147643
## Testing
It's not clear to me where to test the caching behavior of specific targets.
* test/general.shard/build_system/targets/common_test.dart
* This doesn't test the caching behavior of any targets
* test/general.shard/build_system/build_system_test.dart
* test/general.shard/cache_test.dart
* Both of these don't test specific `Target`s, these have `TestTarget`s.
* test/integration.shard/isolated/native_assets_test.dart
* This could work, but it's an integration test that already takes long to run.
This PR resolves#147806
- List plugin that want to be compiled against a higher Android SDK version
- List plugins that depend on a different NDK version (we don't have a way to compare them)
- Small formatting and wording improvements
- Update syntax to work for both Groovy and Kotlin
- If project uses `build.gradle.kts`, then it is mentioned in the warning message (previously always `build.gradle` was mentioned)
<img width="1209" alt="demo" src="https://github.com/flutter/flutter/assets/40357511/be3522b5-d1b4-4983-9fed-8aaa0f0bc7f7">
This pull request aims for improved readability, based on issue #146600.
```dart
// before
List<SupportedPlatform> getSupportedPlatforms({bool includeRoot = false}) {
final List<SupportedPlatform> platforms = includeRoot
? <SupportedPlatform>[SupportedPlatform.root]
: <SupportedPlatform>[];
if (android.existsSync()) {
platforms.add(SupportedPlatform.android);
}
if (ios.exists) {
platforms.add(SupportedPlatform.ios);
}
if (web.existsSync()) {
platforms.add(SupportedPlatform.web);
}
if (macos.existsSync()) {
platforms.add(SupportedPlatform.macos);
}
if (linux.existsSync()) {
platforms.add(SupportedPlatform.linux);
}
if (windows.existsSync()) {
platforms.add(SupportedPlatform.windows);
}
if (fuchsia.existsSync()) {
platforms.add(SupportedPlatform.fuchsia);
}
return platforms;
}
// after
List<SupportedPlatform> getSupportedPlatforms({bool includeRoot = false}) {
return <SupportedPlatform>[
if (includeRoot) SupportedPlatform.root,
if (android.existsSync()) SupportedPlatform.android,
if (ios.exists) SupportedPlatform.ios,
if (web.existsSync()) SupportedPlatform.web,
if (macos.existsSync()) SupportedPlatform.macos,
if (linux.existsSync()) SupportedPlatform.linux,
if (windows.existsSync()) SupportedPlatform.windows,
if (fuchsia.existsSync()) SupportedPlatform.fuchsia,
];
}
```
In service of https://github.com/flutter/flutter/issues/146879 and https://github.com/flutter/flutter/issues/145812. In these issues, we see what appears to be the flutter tool getting stuck somewhere during hot reload. It may help if we knew were exactly where we are getting stuck (preparing assets, writing them to device, etc.).
This PR adds a new parameter to `FlutterTestDriver::run`, `verbose`. When verbose is set, `FlutterTestDriver` will run `flutter` with `--verbose` in its tests. Keep in mind that `FlutterTestDriver` only prints logs from `flutter` when a test fails, so this shouldn't spam the logs of passing tests.
This PR sets the parameter when invoking the flaky tests from https://github.com/flutter/flutter/issues/146879 and #145812, so we should see more detailed logs in future flakes.
While this is a low risk PR, you can verify the change by intentionally breaking hot reload code, clearing the cached tool binaries, and then running either of these tests.
## Description
This introduces a list of packages that we will explicitly not pin. It is to be used for things where the package isn't actually published, but is a transitive dependency of another package included in the SDK. This happens with the `macros` package, for instance, which depends on the private, unpublished, `_macros` package where the SDK does some tricky things to depend on it (it depends on "any", but ships it as part of the SDK).
Also ran `flutter update-packages --force-update` to update all of the pubspec files.
## Related Issues
- Fixes#147656
## Tests
- Added a test that makes sure that explicitly unpinned packages don't show up in the pinned list.
- added language for all code blocks
- replaced `bash` or `shell` with `sh` for consistency.
- added `sh` and `console` in the GitHub template link generator.
- updated test for GitHub template.
Uses kernel concatenation to concatenate the `program.dill` and `native_assets.dill`.
This will enable compiling `native_assets.dill` after `program.dill` so that tree-shaking information can be used.
Issue:
* https://github.com/flutter/flutter/issues/146270
## Implementation choices
* We can either run the frontend_server twice as a process invocation (current PR), or keep the process running after the dart compilation and then shut it down after native assets compilation to kernel. Keeping the process running would require more coordination between different `Target`s.
* We can either chose to only do separate kernel file compilation in release (AOT) builds, or do it both for JIT and AOT (current PR). Doing it differently in JIT/AOT means more conditionals in lib/src/build_system/targets/, doing it single-shot in JIT might be more performant though.
Update: Both of these are mitigated by not running the kernel compiler process if there are no native assets at all.
## Implementation notes
This only updates `flutter assemble`.
The kernel compilation calls in `flutter run` do not require kernel concatenation. The native-assets-kernel-mapping in `flutter run` contains results from `--dry-run` invocations of `hook/build.dart` (and in the future `hook/link.dart`). These `--dry-run` invocations do not get access to tree-shaking information, so the `link` hook to be introduced later can be run before Dart compilation.
## Tests
* Updated the `Target`s tests to reflect the new implementation.
## Related CLs
* frontend_server support: https://dart-review.googlesource.com/c/sdk/+/363567
* Same PR for Dart standalone: https://dart-review.googlesource.com/c/sdk/+/362384
When Swift Package Manager feature is enabled, create app and create plugin will have Swift Package Manager integration already added and will not need to undergo a migration.
Fixes https://github.com/flutter/flutter/issues/146371.
```
flutter config --enable-swift-package-manager
flutter create --ios-language swift --platforms ios,macos swift_app_name
flutter create --ios-language objc --platforms ios objc_app_name
flutter create --template=plugin --ios-language swift --platforms ios,macos swift_plugin_name
flutter create --template=plugin --ios-language objc --platforms ios objc_plugin_name
```
Here's another PR with a couple of typos fixed. As you can see there was a typo in _fileReferenceI**n**dentifiers_, in class _ParsedProjectInfo._ Maybe we should do some check on that since I'm not sure if that property is used somewhere outside Flutter?
From https://github.com/flutter/flutter/issues/143348#issuecomment-2016047148:
> before we ship, we should add a printTrace to the tool about each asset transformer we're invoking and the path/arguments we called it with
I think this is a good idea since asset transformers can be arbitrary Dart programsâmeaning that a lot can go wrong when running them. For example, they can hang indefinitely or perform some sort of I/O that later results in a tool crash. Knowing that asset transformation was involved when debugging a crash (or a slow/stuck `flutter build`) could be useful, so I think adding a `printTrace` or two is a good idea (or at least not a bad one).
This PR will opt out users from legacy analytics if they have already been opted out from package:unified_analytics.
After successfully merging into main, this will be CP'd into beta and stable channels
This PR adds initial support for Swift Package Manager (SPM). Users must opt in. Only compatible with Xcode 15+.
Fixes https://github.com/flutter/flutter/issues/146369.
## Included Features
This PR includes the following features:
* Enabling SPM via config
`flutter config --enable-swift-package-manager`
* Disabling SPM via config (will disable for all projects)
`flutter config --no-enable-swift-package-manager`
* Disabling SPM via pubspec.yaml (will disable for the specific project)
```
flutter:
disable-swift-package-manager: true
```
* Migrating existing apps to add SPM integration if using a Flutter plugin with a Package.swift
* Generates a Swift Package (named `FlutterGeneratedPluginSwiftPackage`) that handles Flutter SPM-compatible plugin dependencies. Generated package is added to the Xcode project.
* Error parsing of common errors that may occur due to using CocoaPods and Swift Package Manager together
* Tool will print warnings when using all Swift Package plugins and encourage you to remove CocoaPods
This PR also converts `integration_test` and `integration_test_macos` plugins to be both Swift Packages and CocoaPod Pods.
## How it Works
The Flutter CLI will generate a Swift Package called `FlutterGeneratedPluginSwiftPackage`, which will have local dependencies on all Swift Package compatible Flutter plugins.
The `FlutterGeneratedPluginSwiftPackage` package will be added to the Xcode project via altering of the `project.pbxproj`.
In addition, a "Pre-action" script will be added via altering of the `Runner.xcscheme`. This script will invoke the flutter tool to copy the Flutter/FlutterMacOS framework to the `BUILT_PRODUCTS_DIR` directory before the build starts. This is needed because plugins need to be linked to the Flutter framework and fortunately Swift Package Manager automatically uses `BUILT_PRODUCTS_DIR` as a framework search path.
CocoaPods will continue to run and be used to support non-Swift Package compatible Flutter plugins.
## Not Included Features
It does not include the following (will be added in future PRs):
* Create plugin template
* Create app template
* Add-to-App integration
Changing the web renderer doesn't directly modify the environment's dart defines, and so doesn't do a full build invalidation. We need to include the web renderer in the build key for the compiler configuration. This information is used directly by the web targets to modify the dart defines that are passed into the compiler, so we need to rebuild if this information changes.
When performing artifact lookups for `Artifact.genSnapshot` for macOS desktop builds, a `TargetPlatform` is used to determine the name of the tool, typically `gen_snapshot_$TARGET_ARCH`. Formerly, this tool was always named `gen_snapshot`.
The astute reader may ask "but Chris, didn't we support TWO target architectures on iOS and therefore need TWO `gen_snapshot` binaries?" Yes, we did support both armv7 and arm64 target architectures on iOS. But no, we didn't initially have two `gen_snapshot` binaries. We did *build* two `gen_snapshots`:
* A 32-bit x86 binary that emitted armv7 AOT code
* A 64-bit x64 binary that emitted arm64 AOT code
At the time, the bitness of the `gen_snapshot` tool needed to match the bitness of the target architecture, and to avoid having to do a lot of work plumbing through suffixed `gen_snapshot` names, the author of that work (who, as evidenced by this patch, is still paying for his code crimes) elected to "cleverly" lipo the two together into a single multi-architecture macOS binary still named `gen_snapshot`. See: https://github.com/flutter/engine/pull/4948
This was later remediated over the course of several patches, including:
* https://github.com/flutter/engine/pull/10430
* https://github.com/flutter/engine/pull/22818
* https://github.com/flutter/flutter/pull/37445
However, there were still cases (notably `--local-engine` workflows in the tool) where we weren't computing the target platform and thus referenced the generic `gen_snapshot` tool.
See: https://github.com/flutter/flutter/issues/38933
Fixed in: https://github.com/flutter/engine/pull/28345
The test removed in this PR, which ensured that null `SnapshotType.platform` was supported was introduced in https://github.com/flutter/flutter/pull/11924 as a followup to https://github.com/flutter/flutter/pull/11820 when the snapshotting logic was originally extracted to the `GenSnapshot` class, and most invocations still passed a null target platform.
Since there are no longer any cases where `TargetPlatform` isn't passed when looking up `Artifact.genSnapshot`, we can safely make the platform non-nullable and remove the test.
This is pre-factoring towards the removal of the generic `gen_snapshot` artifact from the macOS host binaries (which are currently unused since we never pass a null `TargetPlatform`), which is pre-factoring towards the goal of building `gen_snapshot` binaries with an arm64 host architecture, and eliminate the need to use Rosetta during iOS and macOS Flutter builds.
Part of: https://github.com/flutter/flutter/issues/101138
Umbrella issue: https://github.com/flutter/flutter/issues/103386
Umbrella issue: https://github.com/flutter/flutter/issues/69157
No new tests since the behaviour is enforced by the compiler.
This tweaks the Flutter doctor messages for CocoaPods.
This also switches the "unknown version" error to link to the update instructions instead of the installation instructions; the user has already installed CocoaPods in this scenario.
Example error before:
```
â CocoaPods not installed.
CocoaPods is used to retrieve the iOS and macOS platform side's plugin code that responds to your plugin usage on the Dart side.
Without CocoaPods, plugins will not work on iOS or macOS.
For more info, see https://flutter.dev/platform-plugins
To install see https://guides.cocoapods.org/using/getting-started.html#installation for instructions.
```
Example error after:
```
â CocoaPods not installed.
CocoaPods is a package manager for iOS or macOS platform code.
Without CocoaPods, plugins will not work on iOS or macOS.
For more info, see https://flutter.dev/platform-plugins
For installation instructions, see https://guides.cocoapods.org/using/getting-started.html#installation
```
In a ProxiedDevicePortForwarder, there might be a race condition where the local socket has been disconnected, but the remote end was still sending new data. In this case, avoid forwarding new data to the socket.
The interface for `ArgResults` from `package:args` has added new fields. Change the implementations of these in the conductor to extend `Fake` so that these aren't analyzer errors.
This broke the pub roll here: https://github.com/flutter/flutter/pull/146642#issuecomment-2050169629
This adds support for adding the `--wasm` flag to `flutter run` and `flutter drive`
* Emits errors if you attempt to use the skwasm renderer without the `--wasm` flag
* Emits errors if you try to use `--wasm` when not using a web device
* Uses the skwasm renderer by default if you pass `--wasm` and no `--web-renderer`
It looks like the formatter was updated.
We have a test running on the FFIgen repo that checks that rerunning the generated bindings with FFIgen generates identical bindings.
Closes:
* https://github.com/dart-lang/native/issues/1072
Convert `ProjectMigration.run()` and `ProjectMigrator.migrate()` to be async.
Needed for Swift Package Manager migration, which requires some async processes: https://github.com/flutter/flutter/pull/146256
Also move the vm service discovery logic into platform-specific implementation of `Device`s. This is to avoid having platform-specific code in attach.dart.
Xcode 15 will be required for iOS App Store submission
> Please note that as of April 2024 all iOS and iPadOS apps submitted to the App Store must be built with a minimum of Xcode 15 and the iOS 17 SDK.
https://developer.apple.com/ios/submit/
And will also be required for Swift Package Manager support https://github.com/flutter/flutter/pull/146256.
We could swap to "required" but macOS developers don't technically need to upgrade. We can let the Store itself enforce its policies. And we can swap to Xcode 15 "required" when SPM adoption is further along.
Part of https://github.com/flutter/flutter/issues/144582
Part of #137040 and #80374
`possibleResolutions` and `possibleResolutions` used a key containing the platform and the plugin name via `getResolutionKey`. The global list is not necessary and also confusing. It can be avoided by handling the resolution of plugins per platform. This helps to have a more self-contained plugin resolution. This also is necessary to reuse the plugin resolution logic (per platform) for #137040.
This PR is to update material_color_utilities package version to the latest. `material_color_utilities/scheme/scheme_fruit_salad.dart` and `material_color_utilities/scheme/scheme_rainbow.dart` are exported after version 0.9.0.
Once this PR is merged, we don't need to explicitly import these two files like the change in PR #144805, which breaks some dependencies in `Google testing`.
This PR is a follow-up of a previous PR of mine:
https://github.com/flutter/flutter/pull/141417. It was unfinished, i.e.
I only implemented it and used it in `examples/hello_world`. No "flutter
create" templates were modified.
This change is theoretically breaking, but in practice, I am pretty sure
nobody uses this. It was not accounced anywhere, the only app using it
is `examples/hello_world`. I did not do that (that=update docs and
templates) because I wanted a solution that is idiomatic in both Gradle
and Kotlin, and only now I found time to do this.
### Without this change
```groovy
defaultConfig {
applicationId = "io.flutter.examples.hello_world"
minSdk = flutter.minSdkVersion
targetSdk = flutter.targetSdkVersion
versionCode = flutter.versionCode()
versionName = flutter.versionName()
}
```
### With this change
```groovy
defaultConfig {
applicationId = "io.flutter.examples.hello_world"
minSdk = flutter.minSdkVersion
targetSdk = flutter.targetSdkVersion
versionCode = flutter.versionCode
versionName = flutter.versionName
}
```
Idiomatic getter - yay! It's consistent between assignment of all four
props.
### Issue
fixes https://github.com/flutter/flutter/issues/146067
## Pre-launch Checklist
- [x] I read the [Contributor Guide] and followed the process outlined
there for submitting PRs.
- [x] I read the [Tree Hygiene] wiki page, which explains my
responsibilities.
- [x] I read and followed the [Flutter Style Guide], including [Features
we expect every widget to implement].
- [x] I signed the [CLA].
- [x] I listed at least one issue that this PR fixes in the description
above.
- [x] I updated/added relevant documentation (doc comments with `///`).
- [x] I added new tests to check the change I am making, or this PR is
[test-exempt].
- [x] I followed the [breaking change policy] and added [Data Driven
Fixes] where supported.
- [x] All existing and new tests are passing.
---------
Co-authored-by: Reid Baker <reidbaker@google.com>
Fixes https://github.com/flutter/flutter/issues/144454
For reference, after formatting it looks like:
```
ââ Flutter Fix âââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââ
â [!] Your project requires a newer version of the Kotlin Gradle plugin. â
â Find the latest version on https://kotlinlang.org/docs/releases.html#release-details, then update the â
â version number of the plugin with id "org.jetbrains.kotlin.android" in the plugins block of â
â /Users/mackall/development/BugTesting/ELIMINATEME/blah/android/settings.gradle. â
â â
â Alternatively (if your project was created before Flutter 3.19), update â
â /Users/mackall/development/BugTesting/ELIMINATEME/blah/android/build.gradle â
â ext.kotlin_version = '<latest-version>' â
ââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââ
```
In service of https://github.com/flutter/flutter/issues/143348
This PR makes hot reloads reflect changes to transformer configurations under the `assets` section in pubspec.yaml.
This PR is optimized for ease of implementation, and should not be merged as-is. If it is merged as-is, seriously consider creating a tech debt issue and assigning it to someone to make sure it gets resolved.
There are two issues in the previous implementation:
1. `_populateDevices` will return the devices from `deviceNotifier` if it had been initialized, assuming that once it's initialized, it has been properly populated. That assumption is not true because calling getters like `onAdded` would initialize `deviceNotifier` without populating it.
2. `deviceNotifier` instance might be replaced in some cases, causing `onAdded` subscribers to lose any future updates.
To fix (1), this commit added the `isPopulated` field in `deviceNotifier` as a more accurate flag to determine if we need to populate it.
To fix (2), this commit made `deviceNotifier` a final member in `PolingDeviceDiscovery`.
* Adds support for `flutter test --wasm`.
* The test compilation flow is a bit different now, so that it supports compilers other than DDC. Specifically, when we run a set of unit tests, we generate a "switchboard" main function that imports each unit test and runs the main function for a specific one based off of a value set by the JS bootstrapping code. This way, there is one compile step and the same compile output is invoked for each unit test file.
* Also, removes all references to `dart:html` from flutter/flutter.
* Adds CI steps for running the framework unit tests with dart2wasm+skwasm
* These steps are marked as `bringup: true`, so we don't know what kind of failures they will result in. Any failures they have will not block the tree at all yet while we're still in `bringup: true`. Once this PR is merged, I plan on looking at any failures and either fixing them or disabling them so we can get these CI steps running on presubmit.
This fixes https://github.com/flutter/flutter/issues/126692
Pre work for https://github.com/flutter/engine/pull/51229. Removes a lot of code referencing v1 of the android embedding, though not necessarily all of it (I may have missed some, it is hard to know).
Will hopefully make landing that PR less painful (or maybe painless?)
A ProxiedDevice has two port forwarder, one to forward remote host port and another to forward remote device port. During an attach workflow, the port was forwarded by the latter. Update ProxiedDDS to make sure that it works in such case.
This manually rolls pub packages and updates some calls to use updated APIs that use `Uri` instead of file paths (since macro-generated sources don't exist as files on disk).
