When performing artifact lookups for `Artifact.genSnapshot` for macOS desktop builds, a `TargetPlatform` is used to determine the name of the tool, typically `gen_snapshot_$TARGET_ARCH`. Formerly, this tool was always named `gen_snapshot`.
The astute reader may ask "but Chris, didn't we support TWO target architectures on iOS and therefore need TWO `gen_snapshot` binaries?" Yes, we did support both armv7 and arm64 target architectures on iOS. But no, we didn't initially have two `gen_snapshot` binaries. We did *build* two `gen_snapshots`:
* A 32-bit x86 binary that emitted armv7 AOT code
* A 64-bit x64 binary that emitted arm64 AOT code
At the time, the bitness of the `gen_snapshot` tool needed to match the bitness of the target architecture, and to avoid having to do a lot of work plumbing through suffixed `gen_snapshot` names, the author of that work (who, as evidenced by this patch, is still paying for his code crimes) elected to "cleverly" lipo the two together into a single multi-architecture macOS binary still named `gen_snapshot`. See: https://github.com/flutter/engine/pull/4948
This was later remediated over the course of several patches, including:
* https://github.com/flutter/engine/pull/10430
* https://github.com/flutter/engine/pull/22818
* https://github.com/flutter/flutter/pull/37445
However, there were still cases (notably `--local-engine` workflows in the tool) where we weren't computing the target platform and thus referenced the generic `gen_snapshot` tool.
See: https://github.com/flutter/flutter/issues/38933
Fixed in: https://github.com/flutter/engine/pull/28345
The test removed in this PR, which ensured that null `SnapshotType.platform` was supported was introduced in https://github.com/flutter/flutter/pull/11924 as a followup to https://github.com/flutter/flutter/pull/11820 when the snapshotting logic was originally extracted to the `GenSnapshot` class, and most invocations still passed a null target platform.
Since there are no longer any cases where `TargetPlatform` isn't passed when looking up `Artifact.genSnapshot`, we can safely make the platform non-nullable and remove the test.
This is pre-factoring towards the removal of the generic `gen_snapshot` artifact from the macOS host binaries (which are currently unused since we never pass a null `TargetPlatform`), which is pre-factoring towards the goal of building `gen_snapshot` binaries with an arm64 host architecture, and eliminate the need to use Rosetta during iOS and macOS Flutter builds.
Part of: https://github.com/flutter/flutter/issues/101138
Umbrella issue: https://github.com/flutter/flutter/issues/103386
Umbrella issue: https://github.com/flutter/flutter/issues/69157
No new tests since the behaviour is enforced by the compiler.
It's now possible to natively compile a flutter app for windows-arm64. Cross-compilation is not yet implemented.
Uses arm64 artifacts now available for Dart/Flutter. Platform detection is based on Abi class, provided by Dart. Depending if Dart is an arm64 or x64 binary, the Abi is set accordingly. Initial bootstrap of dart artifacts (update_dart_sdk.ps1) is checking PROCESSOR_ARCHITECTURE environment variable, which is the way to detect host architecture on Windows.
This is available only for master channel (on other channels, it fallbacks to windows-x64).
On windows-x64, it produces an x64 app. On windows-arm64, it produces an arm64 app.
Part of work on [#101077](https://github.com/flutter/flutter/pull/141194). This is done as a separate PR to avoid a massive diff.
## Context
1. The `FakeCommand` class accepts a list of patterns that's used to match a command given to its `FakeProcessManager`. Since `FakeCommand` can match a list of patterns, not just specifically strings, it can be used to match commands where the exact value of some arguments can't (easily) known ahead of time. For example, a part of the tool may invoke a command with an argument that is the path of a temporarily file that has a randomly-generated basename.
2. The `FakeCommand` class provides on `onRun` parameter, which is a callback that is run when the `FakeProcessManager` runs a command that matches the `FakeCommand` in question.
## Issue
In the event that a `FakeCommand` is constructed using patterns, the test code can't know the exact values used for arguments in the command. This PR proposes changing the type of `onRun` from `VoidCallback?` to `void Function(List<String>)?`. When run, the value `List<String>` parameter will be the full command that the `FakeCommand` matched.
Example:
```dart
FakeCommand(
command: <Pattern>[
artifacts.getArtifactPath(Artifact.engineDartBinary),
'run',
'vector_graphics_compiler',
RegExp(r'--input=/.*\.temp'),
RegExp(r'--output=/.*\.temp'),
],
onRun: (List<String> command) {
final outputPath = (() {
// code to parse `--output` from `command`
})();
testFileSystem.file(outputPath).createSync(recursive: true);
},
)
```
Reverts flutter/flutter#137618
Initiated by: Jasguerrero
This change reverts the following previous change:
Original Description:
It's now possible to natively compile a flutter app for
windows-arm64. Cross-compilation is not yet implemented.
Uses arm64 artifacts now available for Dart/Flutter.
Platform detection is based on Abi class, provided by Dart. Depending if
Dart is an arm64 or x64 binary, the Abi is set accordingly.
Initial bootstrap of dart artifacts (update_dart_sdk.ps1) is checking
PROCESSOR_ARCHITECTURE environment variable, which is the way to detect
host architecture on Windows.
This is available only for master channel (on other channels, it
fallbacks to windows-x64).
On windows-x64, it produces an x64 app. On windows-arm64, it produces an
arm64 app.
It's now possible to natively compile a flutter app for
windows-arm64. Cross-compilation is not yet implemented.
Uses arm64 artifacts now available for Dart/Flutter.
Platform detection is based on Abi class, provided by Dart. Depending if
Dart is an arm64 or x64 binary, the Abi is set accordingly.
Initial bootstrap of dart artifacts (update_dart_sdk.ps1) is checking
PROCESSOR_ARCHITECTURE environment variable, which is the way to detect
host architecture on Windows.
This is available only for master channel (on other channels, it
fallbacks to windows-x64).
On windows-x64, it produces an x64 app. On windows-arm64, it produces an
arm64 app.
Reverts flutter/flutter#132985
Initiated by: christopherfujino
This change reverts the following previous change:
Original Description:
Provides support for conditional bundling of assets through the existing `--flavor` option for `flutter build` and `flutter run`. Closes https://github.com/flutter/flutter/issues/21682. Resolves https://github.com/flutter/flutter/issues/136092
## Change
Within the `assets` section pubspec.yaml, the user can now specify one or more `flavors` that an asset belongs to. Consider this example:
```yaml
# pubspec.yaml
flutter:
assets:
- assets/normal-asset.png
- path: assets/vanilla/ice-cream.png
flavors:
- vanilla
- path: assets/strawberry/ice-cream.png
flavors:
- strawberry
```
With this pubspec,
* `flutter run --flavor vanilla` will not include `assets/strawberry/ice-cream.png` in the build output.
* `flutter run --flavor strawberry` will not include `assets/vanilla/ice-cream.png`.
* `flutter run` will only include `assets/normal-asset.png`.
## Open questions
* Should this be supported for all platforms, or should this change be limited to ones with documented `--flavor` support (Android, iOS, and (implicitly) MacOS)? This PR currently only enables this feature for officially supported platforms.
## Design thoughts, what this PR does not do, etc.
### This does not provide an automatic mapping/resolution of asset keys/paths to others based on flavor at runtime.
The implementation in this PR represents a simplest approach. Notably, it does not give Flutter the ability to dynamically choose an asset based on flavor using a single asset key. For example, one can't use `Image.asset('config.json')` to dynamically choose between different "flavors" of `config.json` (such as `dev-flavor/config.json` or `prod-flavor/config.json`). However, a user could always implement such a mechanism in their project or in a library by examining the flavor at runtime.
### When multiple entries affect the same file and 1) at least one of these entries have a `flavors` list provided and 2) these lists are not equivalent, we always consider the manifest to be ambiguous and will throw a `ToolExit`.
<details>
For example, these manifests would all be considered ambiguous:
```yaml
assets:
- assets/
- path: assets/vanilla.png
flavors:
- vanilla
assets:
- path: assets/vanilla/
flavors:
- vanilla
- path: assets/vanilla/cherry.png
flavor:
- cherry
# Thinking towards the future where we might add glob/regex support and more conditions other than flavor:
assets:
- path: assets/vanilla/**
flavors:
- vanilla
- path: assets/**/ios/**
platforms:
- ios
# Ambiguous in the case of assets like "assets/vanilla/ios/icon.svg" since we
# don't know if flavor `vanilla` and platform `ios` should be combined using or-logic or and-logic.
```
See [this review comment thread](https://github.com/flutter/flutter/pull/132985#discussion_r1381909942) for the full story on how I arrived at this decision.
</details>
### This does not support Android's multidimensional flavors feature (in an intuitive way)
<details>
Conder this excerpt from a Flutter project's android/app/build.gradle file:
```groovy
android {
// ...
flavorDimensions "mode", "api"
productFlavors {
free {
dimension "mode"
applicationIdSuffix ".free"
}
premium {
dimension "mode"
applicationIdSuffix ".premium"
}
minApi23 {
dimension "api"
versionNameSuffix "-minApi23"
}
minApi21 {
dimension "api"
versionNameSuffix "-minApi21"
}
}
}
```
In this setup, the following values are valid `--flavor` are valid `freeMinApi21`, `freeMinApi23`, `premiumMinApi21`, and `premiumMinApi23`. We call these values "flavor combinations". Consider the following from the Android documentation[^1]:
> In addition to the source set directories you can create for each individual product flavor and build variant, you can also create source set directories for each combination of product flavors. For example, you can create and add Java sources to the src/demoMinApi24/java/ directory, and Gradle uses those sources only when building a variant that combines those two product flavors.
>
> Source sets you create for product flavor combinations have a higher priority than source sets that belong to each individual product flavor. To learn more about source sets and how Gradle merges resources, read the section about how to [create source sets](https://developer.android.com/build/build-variants#sourcesets).
This feature will not behave in this way. If a user utilizes this feature and also Android's multidimensional flavors feature, they will have to list out all flavor combinations that contain the flavor they want to limit an asset to:
```yaml
assets:
- assets/free/
flavors:
- freeMinApi21
- freeMinApi23
```
This is mostly due to a technical limitation in the hot-reload feature of `flutter run`. During a hot reload, the tool will try to update the asset bundle on the device, but the tool does not know the flavors contained within the flavor combination (that the user passes to `--flavor`). Gradle is the source of truth of what flavors were involved in the build, and `flutter run` currently does not access to that information since it's an implementation detail of the build process. We could bubble up this information, but it would require a nontrivial amount of engineering work, and it's unclear how desired this functionality is. It might not be worth implementing.
</details>
See https://flutter.dev/go/flavor-specific-assets for the (outdated) design document.
<summary>Pre-launch Checklist</summary>
</details>
[^1]: https://developer.android.com/build/build-variants#flavor-dimensions
Provides support for conditional bundling of assets through the existing `--flavor` option for `flutter build` and `flutter run`. Closes https://github.com/flutter/flutter/issues/21682. Resolves https://github.com/flutter/flutter/issues/136092
## Change
Within the `assets` section pubspec.yaml, the user can now specify one or more `flavors` that an asset belongs to. Consider this example:
```yaml
# pubspec.yaml
flutter:
assets:
- assets/normal-asset.png
- path: assets/vanilla/ice-cream.png
flavors:
- vanilla
- path: assets/strawberry/ice-cream.png
flavors:
- strawberry
```
With this pubspec,
* `flutter run --flavor vanilla` will not include `assets/strawberry/ice-cream.png` in the build output.
* `flutter run --flavor strawberry` will not include `assets/vanilla/ice-cream.png`.
* `flutter run` will only include `assets/normal-asset.png`.
## Open questions
* Should this be supported for all platforms, or should this change be limited to ones with documented `--flavor` support (Android, iOS, and (implicitly) MacOS)? This PR currently only enables this feature for officially supported platforms.
## Design thoughts, what this PR does not do, etc.
### This does not provide an automatic mapping/resolution of asset keys/paths to others based on flavor at runtime.
The implementation in this PR represents a simplest approach. Notably, it does not give Flutter the ability to dynamically choose an asset based on flavor using a single asset key. For example, one can't use `Image.asset('config.json')` to dynamically choose between different "flavors" of `config.json` (such as `dev-flavor/config.json` or `prod-flavor/config.json`). However, a user could always implement such a mechanism in their project or in a library by examining the flavor at runtime.
### When multiple entries affect the same file and 1) at least one of these entries have a `flavors` list provided and 2) these lists are not equivalent, we always consider the manifest to be ambiguous and will throw a `ToolExit`.
<details>
For example, these manifests would all be considered ambiguous:
```yaml
assets:
- assets/
- path: assets/vanilla.png
flavors:
- vanilla
assets:
- path: assets/vanilla/
flavors:
- vanilla
- path: assets/vanilla/cherry.png
flavor:
- cherry
# Thinking towards the future where we might add glob/regex support and more conditions other than flavor:
assets:
- path: assets/vanilla/**
flavors:
- vanilla
- path: assets/**/ios/**
platforms:
- ios
# Ambiguous in the case of assets like "assets/vanilla/ios/icon.svg" since we
# don't know if flavor `vanilla` and platform `ios` should be combined using or-logic or and-logic.
```
See [this review comment thread](https://github.com/flutter/flutter/pull/132985#discussion_r1381909942) for the full story on how I arrived at this decision.
</details>
### This does not support Android's multidimensional flavors feature (in an intuitive way)
<details>
Conder this excerpt from a Flutter project's android/app/build.gradle file:
```groovy
android {
// ...
flavorDimensions "mode", "api"
productFlavors {
free {
dimension "mode"
applicationIdSuffix ".free"
}
premium {
dimension "mode"
applicationIdSuffix ".premium"
}
minApi23 {
dimension "api"
versionNameSuffix "-minApi23"
}
minApi21 {
dimension "api"
versionNameSuffix "-minApi21"
}
}
}
```
In this setup, the following values are valid `--flavor` are valid `freeMinApi21`, `freeMinApi23`, `premiumMinApi21`, and `premiumMinApi23`. We call these values "flavor combinations". Consider the following from the Android documentation[^1]:
> In addition to the source set directories you can create for each individual product flavor and build variant, you can also create source set directories for each combination of product flavors. For example, you can create and add Java sources to the src/demoMinApi24/java/ directory, and Gradle uses those sources only when building a variant that combines those two product flavors.
>
> Source sets you create for product flavor combinations have a higher priority than source sets that belong to each individual product flavor. To learn more about source sets and how Gradle merges resources, read the section about how to [create source sets](https://developer.android.com/build/build-variants#sourcesets).
This feature will not behave in this way. If a user utilizes this feature and also Android's multidimensional flavors feature, they will have to list out all flavor combinations that contain the flavor they want to limit an asset to:
```yaml
assets:
- assets/free/
flavors:
- freeMinApi21
- freeMinApi23
```
This is mostly due to a technical limitation in the hot-reload feature of `flutter run`. During a hot reload, the tool will try to update the asset bundle on the device, but the tool does not know the flavors contained within the flavor combination (that the user passes to `--flavor`). Gradle is the source of truth of what flavors were involved in the build, and `flutter run` currently does not access to that information since it's an implementation detail of the build process. We could bubble up this information, but it would require a nontrivial amount of engineering work, and it's unclear how desired this functionality is. It might not be worth implementing.
</details>
See https://flutter.dev/go/flavor-specific-assets for the (outdated) design document.
<summary>Pre-launch Checklist</summary>
</details>
[^1]: https://developer.android.com/build/build-variants#flavor-dimensions
Part of tracker issue:
- https://github.com/flutter/flutter/issues/128251
This migrates the event being sent when the "--analyze-size" is used in a flutter invocation
The only file that had this event being sent from is `packages/flutter_tools/lib/src/base/analyze_size.dart`
Fixes https://github.com/flutter/flutter/issues/130277
This PR does two things:
1. introduce a hidden `flutter build _preview` command, that will build a debug windows desktop app and copy it into the SDK's binary cache. This command is only intended to be run during packaging.
2. introduce a new device type, called `PreviewDevice`, which relies on the prebuilt desktop debug app from step 1, copies it into the target app's assets build folder, and then hot reloads their dart code into it.
Fixes https://github.com/flutter/flutter/issues/134566.
Prior to this fix, `ShutdownHooks` were run in the private helper
function `_exit()` defined in the `package:flutter_tools/runner.dart`
library. Independent of this, the tool had signal handling logic that
traps SIGINT and SIGTERM. However, these handlers called `exit()` from
`dart:io`, and didn't run these hooks.
This PR moves the `_exit()` private helper to
`package:flutter_tools/src/base/process.dart` and renames it to
`exitWithHooks()`, so that it can be called by the signal handlers in
`package:flutter_tools/src/base/signals.dart`.
Use the pub cache resolved by pub itself.
To add packages to the flutter.zip download they are packaged as tar.gz and added to the pub-cache on first run by using `pub cache preload`.
...and various other minor cleanup:
* Moved "FLUTTER_STORAGE_BASE_URL" into a constant throughout the code. There are other strings that we should do that to but this one was relevant to the code I was changing.
* Fixed the logger's handling of slow warnings. Previously it deleted too much text. Fixed the test for that to actually verify it entirely, too.
* Made the logger delete the slow warning when it's finished.
* Fixed 'Please choose one (To quit, press "q/Q")' message to be the cleaner 'Please choose one (or "q" to quit)'.
* Added a debug toString to ValidationResult for debugging purposes (not used).
* In http_host_validator:
- Shortened constant names to be clearer (e.g. kPubDevHttpHost -> kPubDev).
- Added GitHub as a tested host since when you run `flutter` we hit that immediately.
- Renamed the check "Network resources".
- Updated the `slowWarning` of the check to say which hosts are pending.
- Removed all timeout logic. Timeouts violate our style guide.
- Removed `int.parse(... ?? '10')`; passing a constant to `int.parse` is inefficient.
- Replaced the `_HostValidationResult` class with `String?` for simplicity.
- Improved the error messages to be more detailed.
- Removed all checks that dependened on the stringification of exceptions. That's very brittle.
- Added a warning specifically for HandshakeException that talks about the implications (MITM attacks).
- Replaced exception-message-parsing logic with just calling `Uri.tryParse` and validating the result.
- Replaced a lot of list-filtering logic with just a single for loop to check the results.
- Replaced code that added a constant to a known-empty list with just returning a constant list.
- Revamped the logic for deciding which hosts to check to just use a single chain of if/else blocks instead of getters, lists literals with `if` expressions, `??`, functions, etc spread over multiple places in the code.
