Starting in Xcode 15, the simulator is no longer included in Xcode and must be downloaded and installed separately.
If you try to run flutter and the simulator is missing, you'll get an error like
```
xcodebuild: error: Unable to find a destination matching the provided destination specifier:
{ id:B1234A5C-67B8-901D-B2CB-FE34F56BDE78 }
Ineligible destinations for the "Runner" scheme:
{ platform:iOS, id:dvtdevice-DVTiPhonePlaceholder-iphoneos:placeholder, name:Any iOS Device, error:iOS 17.0 is not installed. To use with Xcode, first download and install the platform }
```
Print a pretty error to make it easier for developers to know what to do.
Part 2 of https://github.com/flutter/flutter/issues/129558.
Adding debugging for https://github.com/flutter/flutter/issues/129836.
Takes a screenshot when startup test takes too long (10 minutes).
Also, removes some old debugging and add new debugging message.
This PR fixes issue of duplicate entries from `xcdevice list` cause devices to not show in `flutter devices`, `flutter run`, etc.
When a duplicate entry is found, use the entry without errors as the authority. If both have errors, use the one with the higher SDK as the authority.
Fixes https://github.com/flutter/flutter/issues/128719.
This reverts commit a19b3436ee.
We added this logging to try and determine if the reason for Dart VM errors (https://github.com/flutter/flutter/issues/121231) was caused by some issue with the streams.
A recent test proves that is not the case:
https://ci.chromium.org/ui/p/flutter/builders/prod/Mac_ios%20platform_view_ios__start_up/11046/overview
The test shows the Dart VM url in the device log. However, the test log does NOT show a log for the Dart VM url but does show the stack trace, which all come from the main stream, which means it's not an issue with the secondary streams not receiving the log.
So reverting the debugging we added.
Log all output of `ios-deploy` to try and determine if the issue of https://github.com/flutter/flutter/issues/121231 is with stream or with `ios-deploy`.
Note: This will cause some duplicate logs like example below but only in verbose mode
```
(lldb) 2023-05-19 13:48:19.107935-0500 Runner[2521:390363] [VERBOSE-2:FlutterDarwinContextMetalImpeller.mm(35)] Using the Impeller rendering backend.
(lldb) 2023-05-19 13:48:19.107935-0500 Runner[2521:390363] [VERBOSE-2:FlutterDarwinContextMetalImpeller.mm(35)] Using the Impeller rendering backend.
2023-05-19 13:48:19.156866-0500 Runner[2521:390612] flutter: The Dart VM service is listening on http://127.0.0.1:63508/IsFnhXJykCM=/
VM Service URL on device: http://127.0.0.1:63508/IsFnhXJykCM=/
```
Check what is available in the device's iOS DeviceSupport folder to check if symbols were properly fetched. Also, add some logging to track what status the debugger is in.
Debugging for https://github.com/flutter/flutter/issues/121231.
Adds the ability to rename Runner.xcodeproj and Runner.xcworkspace - fixes https://github.com/flutter/flutter/issues/9767.
To rename a project:
1. Open Runner.xcodeproj in Xcode
2. In the left panel, left click "Show File Inspector"
<img width="441" alt="Screenshot 2023-04-17 at 11 41 07 PM" src="https://user-images.githubusercontent.com/36148254/232692957-8743742d-c3ef-42e5-833f-dff31aeb2b6a.png">
3. In the right panel, the name of the project, "Runner", should be visible under "Identity and Type". Change the name and press enter.
<img width="299" alt="Screenshot 2023-04-17 at 11 40 43 PM" src="https://user-images.githubusercontent.com/36148254/232693315-b6a71165-f5e3-4a0f-8954-2f3eee5b67cf.png">
4. A wizard should pop up. Click Rename.
<img width="573" alt="Screenshot 2023-04-17 at 11 44 01 PM" src="https://user-images.githubusercontent.com/36148254/232693381-bb9cf026-2a75-4844-b42d-ae0036ae9fdd.png">
To rename the workspace:
1. Make sure Xcode is closed.
2. Rename the .xcworkspace to your new name.
If you also renamed the project
3. Reopen the .xcworkspace in Xcode. If the selected project is the old name and in red, update it to match the new project name.
Tests for schemeFor were changed as with Xcode 14, in some cases the scheme will be renamed along with the project. Thus we will get the best match scheme for either the project name, or the default name Runner. However if a flavor is present, the scheme should always match the flavor.
1. Add iOS and macOS migration to mark "last upgraded" Xcode version to 14.3 to prevent `Update to recommended settings` warning.
2. Update iOS and macOS templates to same.
3. Update iOS template to set `BuildIndependentTargetsInParallel` to YES as suggested. I didn't add a migration for this since it seems like a minor optimization and I don't think it's worth a potentially botched/corrupted migration.
4. Run all example/integration test project to see migrator work.
5. Add some missing test projects to the build shard since I noticed they were missing and I had to build those manually outside `SHARD=build_tests`.
Fixes https://github.com/flutter/flutter/issues/125817
See https://github.com/flutter/flutter/pull/90304 for Xcode 13 example.
Rename variables, update comments, etc from `network` to `wireless` to keep it more uniform.
Also, move non-overriden messages related to device selection into the file they're used.
Part 7 in breakdown of https://github.com/flutter/flutter/pull/121262.
* setup wireless debugging to use device IP
* fix tests
* fix unused var and missing annotation
* remove unneeded try catch
* remove commented out line, change null to package id
* better way to get package id
* update mDNS lookup to continously check for server, add messaging if takes too long to find observatory url, update flutter drive to enable publish-port if using network device
* Refactor mDNS Discovery to poll for observatories and better handle multiple instances of the same app. Update drive command to make publish-port more stable. Update attach for iOS to only use Protocol Discovery if applicable, run mDNS and Protocol Discovery simultaneously, handle --debug-port/--debug-url/--device-vmservice-port, continously poll for obseravtories with mDNS, include port in error message when mutliple available
* add and update comments, use logger spinner intead of timer in flutter attach, other small improvements
* add newline to message so next log won't be on same line
* fix install/waiting for permission status progress so it doens't double print the time it took.
* only print backtrace if observatory times out on a physical usb connected device
* fix test
* Update related references from Observatory to Dart VM Service
* fix test
* Add Info.plist from build directory as input path to Thin Binary build phase
* fix directive ordering
* migrate benchmark, integration, and example tests
* add debugging options to simulator, test more debugging flags, add tests for other launch arguements
* refactor iOS launch arguments to use one function for both simulator and physical devices
* treat dart flags differently between physical and simulator
* Simplify some flags between devices.
Change --disable-service-auth-codes to not always be included for physical devices, only if disableServiceAuthCodes is true.
Change --disable-observatory-publication to be used for simulator devices too.
Change --enable-checked-mode & --verify-entry-points to be used if debuggingEnabled is true regardless of device type.
Chnage --trace-startup to be used for simulator devices too.
* fix ios release mode with buildable app startApp test
* determine observatory-port from deviceVmServicePort and hostVmServicePort
* add comments and remove hasObservatoryPort
* exclude xcworkspace that begins with a period
* fix if spacing, add comment
* add unit test for when no xcworkspace found
* update to use xcodeWorkspace, make it nullable and refactor
* check if hostAppRoot exists before trying to get xcworkspace
* use local variables to take advantage of type promotion
* only check if not null, don't need to check if exists
* readd exist check for migrate
* readd missing line at end of file
