When a `TextField` is rendered before a `Navigator`, it breaks in semantics mode. This is because the framework generates the incorrect semantics tree (excludes the TextField) and when that tree gets sent to the engine, we don't get the signal to create the corresponding `<input>` element.
This happens for a few reasons:
* `ModalBarrier` uses `BlockSemantics` to drop the semantics of routes beneath the current route in `Navigator`
* `ModalBarrier` mistakenly recognizes the widget outside of the `Navigator` to be its sibling
* So we end up dropping the semantics node of the `TextField` rendered before it.
The fix is to let `Navigator` generate a semantics node so that `ModalBarrier` doesn't mistakenly think widgets outside of `Navigator` are its siblings.
`Navigator` doesn't currently do this, which causes all the nodes generated from its widget subtree to be directly attached to the parent semantics node above `Navigator` - since this is also the parent of `TextField`, it considers them siblings.
Fixes https://github.com/flutter/flutter/issues/129324
Much nicer calling API and simplifies evolving this API in the future.
I wish we could write a dart fix for this, but that's blocked on https://github.com/dart-lang/sdk/issues/54668.
The old doc says that, AutomatedTestWidgetsFlutterBinding for `flutter test` and LiveTestWidgetsFlutterBinding for `flutter run`. However, suppose we `flutter test integration_test/simple_test.dart` with the following code:
```
void main() {
testWidgets('hi', (WidgetTester tester) async {
print('hi ${TestWidgetsFlutterBinding.instance} ${Platform.operatingSystem}');
});
}
```
We will see: `hi <IntegrationTestWidgetsFlutterBinding> ios`. Therefore, we see `IntegrationTestWidgetsFlutterBinding` is used in a `flutter test` command, which is contrary to the documentation.
This reverts commit
d24c01bd0c.
The original change was reverted because it caused some apps to get
stuck on the splash screen on some phones.
An investigation determined that this was due to a rounding error.
Example: The device reports a physical size of 1008.0 x 2198.0 with a
dpr of 1.912500023841858. Flutter would translate that to a logical size
of 527.0588169589221 x 1149.2810314243163 and use that as the input for
its layout algorithm. Since the constraints here are tight, the layout
algorithm would determine that the resulting logical size of the root
render object must be 527.0588169589221 x 1149.2810314243163.
Translating this back to physical pixels by applying the dpr resulted in
a physical size of 1007.9999999999999 x 2198.0 for the frame. Android
now rejected that frame because it didn't match the expected size of
1008.0 x 2198.0 and since no frame had been rendered would never take
down the splash screen.
Prior to dynamically sized views, this wasn't an issue because we would
hard-code the frame size to whatever the requested size was.
Changes in this PR over the original PR:
* The issue has been fixed now by constraining the calculated physical
size to the input physical constraints which makes sure that we always
end up with a size that is acceptable to the operating system.
* The `ViewConfiguration` was refactored to use the slightly more
convenient `BoxConstraints` over the `ViewConstraints` to represent
constraints. Both essentially represent the same thing, but
`BoxConstraints` are more powerful and we avoid a couple of translations
between the two by translating the` ViewConstraints` from the
`FlutterView` to `BoxConstraints` directly when the `ViewConfiguration`
is created.
All changes over the original PR are contained in the second commit of
this PR.
Fixes b/316813075
Part of https://github.com/flutter/flutter/issues/134501.
Reverts flutter/flutter#139717
Initiated by: LongCatIsLooong
This change reverts the following previous change:
Original Description:
Fixes https://github.com/flutter/flutter/issues/131435, #104594, #43400
Needs https://github.com/flutter/engine/pull/48774 (to fix the web test failure).
Currently the method we use for text span hit testing `TextPainter.getPositionForOffset` always returns the closest `TextPosition`, even when the given offset is far away from the text.
The new TextPaintes method tells you the layout bounds (`width = letterspacing / 2 + x_advance + letterspacing / 2`, `height = font ascent + font descent`) of a character, the PR changes the hit testing implementation such that a TextSpan is only considered hit if the point-down event landed in one of it's character's layout bounds.
Potential issues:
1. In theory since the text is baseline aligned, we should use the max ascent and max descent of each character to calculate the height of the text span's hit-test region, in case some characters in the span have to fall back to a different font, but that will be slower and it typically doesn't make a huge difference.
This is a breaking change. It also introduces a new finder and a new method `WidgetTester.tapOnText`: `await tester.tapOnText('string to match')` for ease of migration.
Fixes https://github.com/flutter/flutter/issues/131435, #104594, #43400
Needs https://github.com/flutter/engine/pull/48774 (to fix the web test failure).
Currently the method we use for text span hit testing `TextPainter.getPositionForOffset` always returns the closest `TextPosition`, even when the given offset is far away from the text.
The new TextPaintes method tells you the layout bounds (`width = letterspacing / 2 + x_advance + letterspacing / 2`, `height = font ascent + font descent`) of a character, the PR changes the hit testing implementation such that a TextSpan is only considered hit if the point-down event landed in one of it's character's layout bounds.
Potential issues:
1. In theory since the text is baseline aligned, we should use the max ascent and max descent of each character to calculate the height of the text span's hit-test region, in case some characters in the span have to fall back to a different font, but that will be slower and it typically doesn't make a huge difference.
This is a breaking change. It also introduces a new finder and a new method `WidgetTester.tapOnText`: `await tester.tapOnText('string to match')` for ease of migration.
1. Move leak_tracker and leak_tracker_testing out of direct dependencies.
2. Move leak_tracker_flutter_testing from dev to prod dependencies for flutter_test
It is prerequisite for https://github.com/flutter/flutter/issues/135856
Pinning the package:web dependency constrains downstream packages from
using newer versions and making sure they support the version pinned in
Flutter. Since the usage of package:web in Flutter is light, we should
instead have a small shim like the engine and keep package:web as a dev
dependency only.
This PR adds `String? identifier` to `Semantics` and `SemanticsProperties`. The `identifier` will be exposed on Android as `resource-id` and on iOS as `accessibilityIdentifier`.
Mainly targeted at #17988
Initial Engine PR with Android support: https://github.com/flutter/engine/pull/47961
iOS Engine PR: https://github.com/flutter/engine/pull/48858
### Migration
This change breaks the SemanticsUpdateBuilder API which is on the Framework<-->Engine border. For more details see [engine PR](https://github.com/flutter/engine/pull/47961).
Steps:
part 1: [engine] add `SemanticsUpdateBuilderNew` https://github.com/flutter/engine/pull/47961
**part 2: [flutter] use `SemanticsUpdateBuilderNew`** <-- we are here
part 3: [engine] update `SemanticsUpdateBuilder` to be the same as `SemanticsUpdateBuilderNew`*
part 4: [flutter] use (now updated) `SemanticsUpdateBuilder` again.
part 5: [engine] remove `SemanticsBuilderNew`
Towards https://github.com/flutter/flutter/issues/134501.
This change is based on https://github.com/flutter/engine/pull/48090. It changes the `RenderView` to be dynamically sized based on its content if the `FlutterView` it is configured with allows it (i.e. the `FlutterView` has loose `FlutterView.physicalConstraints`). For that, it uses those `physicalConstraints` as input to the layout algorithm by passing them on to its child (after translating them to logical constraints via the device pixel ratio). The resulting `Size` that the `RenderView` would like to be is then communicated back to the engine by passing it to the `FlutterView.render` call.
Tests will fail until https://github.com/flutter/engine/pull/48090 has rolled into the framework.
This updates the implementation to use the stopwatch from the Clock object and pipes it through to the TestWidgetsFlutterBinding so it will be kept in sync with FakeAsync.
Relands https://github.com/flutter/flutter/pull/138843 attempted to reland https://github.com/flutter/flutter/pull/137381 which attempted to reland #132291
Fixes https://github.com/flutter/flutter/issues/97761
1. The original change was reverted due to flakiness it introduced in tests that use fling gestures.
* Using a mocked clock through the test binding fixes this now
2. It was reverted a second time because a change at tip of tree broke it, exposing memory leaks, but it was not rebased before landing.
* These leaks are now fixed
3. It was reverted a third time, because we were so excellently quick to revert those other times, that we did not notice the broken benchmark that only runs in postsubmit.
* The benchmark is now fixed
`FakeView` wraps the same underlying `FlutterView`. Sending semantics updates and Scene objects from multiple fake views into the same engine `FlutterView` violates contracts with the engine. This PR stubs out `render` and `updateSemantics` methods in `FakeView` classes to prevent that.
This unblocks https://github.com/flutter/engine/pull/48251, which implements multi-view semantics for web.
This version is needed so that dart:js_interop can move to extension
types. Also adds some code to handle some breaking changes:
- Body -> Response. Body was an IDL interface mixin type we exposed in
dart:html. Going forward, users should either use Request or Response.
- Casts to JSAny. These are temporary until we move package:web types to
extension types. Currently, package:web types can't implement JSObject
as JSObject will move to be an extension type itself.
Co-authored-by: Kevin Moore <kevmoo@users.noreply.github.com>
Reverts flutter/flutter#137381
Initiated by: Piinks
This change reverts the following previous change:
Original Description:
This updates the implementation to use the stopwatch from the Clock object and piping it through to the TestWidgetsFlutterBinding so it will be kept in sync with FakeAsync.
Relands #132291
Fixes https://github.com/flutter/flutter/issues/97761
The change was reverted due to flakiness it introduced in tests that use fling gestures.
* https://github.com/flutter/flutter/issues/135728
Fixes https://github.com/flutter/flutter/issues/137696
This will get the tree green again.
The problem is that `CustomSemanticsAction` has static state in it, and todays test seed order makes things unhappy.
Analyzer's dependency on autosnapshotting causes issues.
Because every version of integration_test from sdk depends on leak_tracker from hosted and autosnapshotting depends on leak_tracker from path, integration_test from sdk is forbidden.
So, because autosnapshotting depends on integration_test from sdk, version solving failed.
Reverts flutter/flutter#135249
Initiated by: zanderso
This change reverts the following previous change:
Original Description:
Changes golden tests on CanvasKit to use Layer.toImage instead of browser APIs for screenshots. This brings it more in line with other platforms and should also fix some async timing bugs with tests.
* Added `performAction` to `SemanticsController` as well as specific methods for specific actions
* Added a `scrollable` finder to `find.semantics` as a convenience method for `findAny(<all scrollable actions>)`
* Updated `containsSemantics` and `matchSemantics` matchers to also work on `FinderBase<Semantics>`
Closes#112413
Updates references to `finders.dart` in `controller.dart` to use a namespace. This enables us to make use of `finders.dart#find` in `SemanticsController` without anything being shadowed.
Fixes#136421
## Description
This removes all of the comments that are of the form "so-and-so (must not be null|can ?not be null|must be non-null)" from the cases where those values are defines as non-nullable values.
This PR removes them from the animation, cupertino, foundation, gestures, semantics, and services libraries. Each of them only had a few, so I lumped them together.
This was done by hand, since it really didn't lend itself to scripting, so it needs to be more than just spot-checked, I think. I was careful to leave any comment that referred to parameters that were nullable, but I may have missed some.
In addition to being no longer relevant after null safety has been made the default, these comments were largely fragile, in that it was easy for them to get out of date, and not be accurate anymore anyhow.
This did create a number of constructor comments which basically say "Creates a [Foo].", but I don't really know how to avoid that in a large scale change, since there's not much you can really say in a lot of cases. I think we might consider some leniency for constructors to the "Comment must be meaningful" style guidance (which we de facto have already, since there are a bunch of these).
## Related PRs
- https://github.com/flutter/flutter/pull/134991
- https://github.com/flutter/flutter/pull/134992
- https://github.com/flutter/flutter/pull/134993
- https://github.com/flutter/flutter/pull/134994
## Tests
- Documentation only change.
## Description
This removes all of the comments that are of the form "so-and-so must not be null" or "so-and-so must be non-null" from the cases where those values are defines as non-nullable values.
This PR removes them from the library in the repo that don't have anything to do with the framework.
This was done by hand, since it really didn't lend itself to scripting, so it needs to be more than just spot-checked, I think. I was careful to leave any comment that referred to parameters that were nullable, but I may have missed some.
In addition to being no longer relevant after null safety has been made the default, these comments were largely fragile, in that it was easy for them to get out of date, and not be accurate anymore anyhow.
This did create a number of constructor comments which basically say "Creates a [Foo].", but I don't really know how to avoid that in a large scale change, since there's not much you can really say in a lot of cases. I think we might consider some leniency for constructors to the "Comment must be meaningful" style guidance (which we de facto have already, since there are a bunch of these).
## Related PRs
- https://github.com/flutter/flutter/pull/134984
- https://github.com/flutter/flutter/pull/134991
- https://github.com/flutter/flutter/pull/134992
- https://github.com/flutter/flutter/pull/134993
## Tests
- Documentation only change.
Part of https://github.com/flutter/flutter/issues/133171.
Removes from `TestWindow`:
* `localeTestValue`
* `clearLocaleTestValue`
* `localesTestValue`
* `clearLocalesTestValue`
* `initialLifecycleStateTestValue`
* `alwaysUse24HourFormatTestValue`
* `clearAlwaysUse24HourTestValue`
* `brieflyShowPasswordTestValue`
* `defaultRouteNameTestValue`
* `clearDefaultRouteNameTestValue`
* `semanticsEnabledTestValue`
* `clearSemanticsEnabledTestValue`
* `accessibilityFeaturesTestValue`
* `clearAccessibilityFeaturesTestValue`
These properties have reached the end of their deprecation period.
Otherwise when tests use `expectLater(getBytesOrNull(), matchesGoldenFile(...))`, they may fail in sound null safety mode and pass in weak null safety mode.
Fixes https://github.com/flutter/flutter/issues/132964
In `MacOSTestTextInputKeyHandler`, there are some mappings from shortcuts to generate macOS selectors. However, `ctrl + backspace` isn't mapped to `deleteBackwardByDecomposingPreviousCharacter:`.
This PR adds the mapping for `deleteBackwardByDecomposingPreviousCharacter:`.
Fixes: https://github.com/flutter/flutter/issues/132917
- slightly improved assert message when row cell counts don't match column count.
- more breadcrumbs in API documentation. more documentation in general.
- added more documentation for the direction of the "ascending" arrow.
- two samples for PaginatedDataTable.
- make PaginatedDataTable support hot reloading across changes to the number of columns.
- introduce matrix3MoreOrLessEquals. An earlier version of this PR used it in tests, but eventually it was not needed. The function seems useful to keep though.
* Updated `AutomatedTestWidgetsFlutterBinding.pump` to use microseconds instead of milliseconds
* Added a test to prevent regression of the microsecond precision
* Fixed a test that incorrectly assumed millisecond precision
Closes#112610
* Pulled `FinderBase` out of `Finder`
* `FinderBase` can be used for any object, not just elements
* Terminology was updated to be more "find" related
* Re-implemented `Finder` using `FinderBase<Element>`
* Backwards compatibility maintained with `_LegacyFinderMixin`
* Introduced base classes for SemanticsNode finders
* Introduced basic SemanticsNode finders through `find.semantics`
* Updated some relevant matchers to make use of the more generic `FinderBase`
Closes#123634Closes#115874
Fixes https://github.com/flutter/flutter/issues/59413
This relocates `mock_canvas.dart` and `recording_canvas.dart` from `flutter/test/rendering` to `flutter_test`.
The testing functionality afforded by mock_canvas should be available to everyone, not just the framework. :)
mock_canvas.dart needed a bit of cleanup - things like formatting and super parameters.
This change enables Flutter to generate multiple Scenes to be rendered into separate FlutterViews from a single widget tree. Each Scene is described by a separate render tree, which are all associated with the single widget tree.
This PR implements the framework-side mechanisms to describe the content to be rendered into multiple views. Separate engine-side changes are necessary to provide these views to the framework and to draw the framework-generated Scene into them.
## Summary of changes
The details of this change are described in [flutter.dev/go/multiple-views](https://flutter.dev/go/multiple-views). Below is a high-level summary organized by layers.
### Rendering layer changes
* The `RendererBinding` no longer owns a single `renderView`. In fact, it doesn't OWN any `RenderView`s at all anymore. Instead, it offers an API (`addRenderView`/`removeRenderView`) to add and remove `RenderView`s that then will be MANAGED by the binding. The `RenderView` itself is now owned by a higher-level abstraction (e.g. the `RawView` Element of the widgets layer, see below), who is also in charge of adding it to the binding. When added, the binding will interact with the `RenderView` to produce a frame (e.g. by calling `compositeFrame` on it) and to perform hit tests for incoming pointer events. Multiple `RenderView`s can be added to the binding (typically one per `FlutterView`) to produce multiple Scenes.
* Instead of owning a single `pipelineOwner`, the `RendererBinding` now owns the root of the `PipelineOwner` tree (exposed as `rootPipelineOwner` on the binding). Each `PipelineOwner` in that tree (except for the root) typically manages its own render tree typically rooted in one of the `RenderView`s mentioned in the previous bullet. During frame production, the binding will instruct each `PipelineOwner` of that tree to flush layout, paint, semantics etc. A higher-level abstraction (e.g. the widgets layer, see below) is in charge of adding `PipelineOwner`s to this tree.
* Backwards compatibility: The old `renderView` and `pipelineOwner` properties of the `RendererBinding` are retained, but marked as deprecated. Care has been taken to keep their original behavior for the deprecation period, i.e. if you just call `runApp`, the render tree bootstrapped by this call is rooted in the deprecated `RendererBinding.renderView` and managed by the deprecated `RendererBinding.pipelineOwner`.
### Widgets layer changes
* The `WidgetsBinding` no longer attaches the widget tree to an existing render tree. Instead, it bootstraps a stand-alone widget tree that is not backed by a render tree. For this, `RenderObjectToWidgetAdapter` has been replaced by `RootWidget`.
* Multiple render trees can be bootstrapped and attached to the widget tree with the help of the `View` widget, which internally is backed by a `RawView` widget. Configured with a `FlutterView` to render into, the `RawView` creates a new `PipelineOwner` and a new `RenderView` for the new render tree. It adds the new `RenderView` to the `RendererBinding` and its `PipelineOwner` to the pipeline owner tree.
* The `View` widget can only appear in certain well-defined locations in the widget tree since it bootstraps a new render tree and does not insert a `RenderObject` into an ancestor. However, almost all Elements expect that their children insert `RenderObject`s, otherwise they will not function properly. To produce a good error message when the `View` widget is used in an illegal location, the `debugMustInsertRenderObjectIntoSlot` method has been added to Element, where a child can ask whether a given slot must insert a RenderObject into its ancestor or not. In practice, the `View` widget can be used as a child of the `RootWidget`, inside the `view` slot of the `ViewAnchor` (see below) and inside a `ViewCollection` (see below). In those locations, the `View` widget may be wrapped in other non-RenderObjectWidgets (e.g. InheritedWidgets).
* The new `ViewAnchor` can be used to create a side-view inside a parent `View`. The `child` of the `ViewAnchor` widget renders into the parent `View` as usual, but the `view` slot can take on another `View` widget, which has access to all inherited widgets above the `ViewAnchor`. Metaphorically speaking, the view is anchored to the location of the `ViewAnchor` in the widget tree.
* The new `ViewCollection` widget allows for multiple sibling views as it takes a list of `View`s as children. It can be used in all the places that accept a `View` widget.
## Google3
As of July 5, 2023 this change passed a TAP global presubmit (TGP) in google3: tap/OCL:544707016:BASE:545809771:1688597935864:e43dd651
## Note to reviewers
This change is big (sorry). I suggest focusing the initial review on the changes inside of `packages/flutter` first. The majority of the changes describe above are implemented in (listed in suggested review order):
* `rendering/binding.dart`
* `widgets/binding.dart`
* `widgets/view.dart`
* `widgets/framework.dart`
All other changes included in the PR are basically the fallout of what's implemented in those files. Also note that a lot of the lines added in this PR are documentation and tests.
I am also very happy to walk reviewers through the code in person or via video call, if that is helpful.
I appreciate any feedback.
## Feedback to address before submitting ("TODO")
Manual roll is needed because incoming dart sdk requires updated version
vm_snapshot_analysis (>=0.7.4).
5ae09b8b4f...7c83ea3e85
```
7c83ea3e85 Reland "Manual roll Dart SDK from 2d98d9e27dae to 0b07debd5862 (21 revisions) (#43457)" (#43472)
9ef3e8d533 Roll Skia from 5eba922297bb to 93c92f97f5ab (2 revisions) (#43471)
```
Remove implementation of SuitePlatform from the test as well. Remove use
of fake cwd from SuitePlatform as it can't be properly faked.
- Bumps `vm_service` from `11.6.0` to `11.7.1`
- Bumps `web` from `0.1.3-beta` to `0.1.4-beta` and adds it everywhere.
- Moves `js` from `dependencies` to `dev_dependencies`
