Reverts flutter/flutter#132985
Initiated by: christopherfujino
This change reverts the following previous change:
Original Description:
Provides support for conditional bundling of assets through the existing `--flavor` option for `flutter build` and `flutter run`. Closes https://github.com/flutter/flutter/issues/21682. Resolves https://github.com/flutter/flutter/issues/136092
## Change
Within the `assets` section pubspec.yaml, the user can now specify one or more `flavors` that an asset belongs to. Consider this example:
```yaml
# pubspec.yaml
flutter:
assets:
- assets/normal-asset.png
- path: assets/vanilla/ice-cream.png
flavors:
- vanilla
- path: assets/strawberry/ice-cream.png
flavors:
- strawberry
```
With this pubspec,
* `flutter run --flavor vanilla` will not include `assets/strawberry/ice-cream.png` in the build output.
* `flutter run --flavor strawberry` will not include `assets/vanilla/ice-cream.png`.
* `flutter run` will only include `assets/normal-asset.png`.
## Open questions
* Should this be supported for all platforms, or should this change be limited to ones with documented `--flavor` support (Android, iOS, and (implicitly) MacOS)? This PR currently only enables this feature for officially supported platforms.
## Design thoughts, what this PR does not do, etc.
### This does not provide an automatic mapping/resolution of asset keys/paths to others based on flavor at runtime.
The implementation in this PR represents a simplest approach. Notably, it does not give Flutter the ability to dynamically choose an asset based on flavor using a single asset key. For example, one can't use `Image.asset('config.json')` to dynamically choose between different "flavors" of `config.json` (such as `dev-flavor/config.json` or `prod-flavor/config.json`). However, a user could always implement such a mechanism in their project or in a library by examining the flavor at runtime.
### When multiple entries affect the same file and 1) at least one of these entries have a `flavors` list provided and 2) these lists are not equivalent, we always consider the manifest to be ambiguous and will throw a `ToolExit`.
<details>
For example, these manifests would all be considered ambiguous:
```yaml
assets:
- assets/
- path: assets/vanilla.png
flavors:
- vanilla
assets:
- path: assets/vanilla/
flavors:
- vanilla
- path: assets/vanilla/cherry.png
flavor:
- cherry
# Thinking towards the future where we might add glob/regex support and more conditions other than flavor:
assets:
- path: assets/vanilla/**
flavors:
- vanilla
- path: assets/**/ios/**
platforms:
- ios
# Ambiguous in the case of assets like "assets/vanilla/ios/icon.svg" since we
# don't know if flavor `vanilla` and platform `ios` should be combined using or-logic or and-logic.
```
See [this review comment thread](https://github.com/flutter/flutter/pull/132985#discussion_r1381909942) for the full story on how I arrived at this decision.
</details>
### This does not support Android's multidimensional flavors feature (in an intuitive way)
<details>
Conder this excerpt from a Flutter project's android/app/build.gradle file:
```groovy
android {
// ...
flavorDimensions "mode", "api"
productFlavors {
free {
dimension "mode"
applicationIdSuffix ".free"
}
premium {
dimension "mode"
applicationIdSuffix ".premium"
}
minApi23 {
dimension "api"
versionNameSuffix "-minApi23"
}
minApi21 {
dimension "api"
versionNameSuffix "-minApi21"
}
}
}
```
In this setup, the following values are valid `--flavor` are valid `freeMinApi21`, `freeMinApi23`, `premiumMinApi21`, and `premiumMinApi23`. We call these values "flavor combinations". Consider the following from the Android documentation[^1]:
> In addition to the source set directories you can create for each individual product flavor and build variant, you can also create source set directories for each combination of product flavors. For example, you can create and add Java sources to the src/demoMinApi24/java/ directory, and Gradle uses those sources only when building a variant that combines those two product flavors.
>
> Source sets you create for product flavor combinations have a higher priority than source sets that belong to each individual product flavor. To learn more about source sets and how Gradle merges resources, read the section about how to [create source sets](https://developer.android.com/build/build-variants#sourcesets).
This feature will not behave in this way. If a user utilizes this feature and also Android's multidimensional flavors feature, they will have to list out all flavor combinations that contain the flavor they want to limit an asset to:
```yaml
assets:
- assets/free/
flavors:
- freeMinApi21
- freeMinApi23
```
This is mostly due to a technical limitation in the hot-reload feature of `flutter run`. During a hot reload, the tool will try to update the asset bundle on the device, but the tool does not know the flavors contained within the flavor combination (that the user passes to `--flavor`). Gradle is the source of truth of what flavors were involved in the build, and `flutter run` currently does not access to that information since it's an implementation detail of the build process. We could bubble up this information, but it would require a nontrivial amount of engineering work, and it's unclear how desired this functionality is. It might not be worth implementing.
</details>
See https://flutter.dev/go/flavor-specific-assets for the (outdated) design document.
<summary>Pre-launch Checklist</summary>
</details>
[^1]: https://developer.android.com/build/build-variants#flavor-dimensions
Provides support for conditional bundling of assets through the existing `--flavor` option for `flutter build` and `flutter run`. Closes https://github.com/flutter/flutter/issues/21682. Resolves https://github.com/flutter/flutter/issues/136092
## Change
Within the `assets` section pubspec.yaml, the user can now specify one or more `flavors` that an asset belongs to. Consider this example:
```yaml
# pubspec.yaml
flutter:
assets:
- assets/normal-asset.png
- path: assets/vanilla/ice-cream.png
flavors:
- vanilla
- path: assets/strawberry/ice-cream.png
flavors:
- strawberry
```
With this pubspec,
* `flutter run --flavor vanilla` will not include `assets/strawberry/ice-cream.png` in the build output.
* `flutter run --flavor strawberry` will not include `assets/vanilla/ice-cream.png`.
* `flutter run` will only include `assets/normal-asset.png`.
## Open questions
* Should this be supported for all platforms, or should this change be limited to ones with documented `--flavor` support (Android, iOS, and (implicitly) MacOS)? This PR currently only enables this feature for officially supported platforms.
## Design thoughts, what this PR does not do, etc.
### This does not provide an automatic mapping/resolution of asset keys/paths to others based on flavor at runtime.
The implementation in this PR represents a simplest approach. Notably, it does not give Flutter the ability to dynamically choose an asset based on flavor using a single asset key. For example, one can't use `Image.asset('config.json')` to dynamically choose between different "flavors" of `config.json` (such as `dev-flavor/config.json` or `prod-flavor/config.json`). However, a user could always implement such a mechanism in their project or in a library by examining the flavor at runtime.
### When multiple entries affect the same file and 1) at least one of these entries have a `flavors` list provided and 2) these lists are not equivalent, we always consider the manifest to be ambiguous and will throw a `ToolExit`.
<details>
For example, these manifests would all be considered ambiguous:
```yaml
assets:
- assets/
- path: assets/vanilla.png
flavors:
- vanilla
assets:
- path: assets/vanilla/
flavors:
- vanilla
- path: assets/vanilla/cherry.png
flavor:
- cherry
# Thinking towards the future where we might add glob/regex support and more conditions other than flavor:
assets:
- path: assets/vanilla/**
flavors:
- vanilla
- path: assets/**/ios/**
platforms:
- ios
# Ambiguous in the case of assets like "assets/vanilla/ios/icon.svg" since we
# don't know if flavor `vanilla` and platform `ios` should be combined using or-logic or and-logic.
```
See [this review comment thread](https://github.com/flutter/flutter/pull/132985#discussion_r1381909942) for the full story on how I arrived at this decision.
</details>
### This does not support Android's multidimensional flavors feature (in an intuitive way)
<details>
Conder this excerpt from a Flutter project's android/app/build.gradle file:
```groovy
android {
// ...
flavorDimensions "mode", "api"
productFlavors {
free {
dimension "mode"
applicationIdSuffix ".free"
}
premium {
dimension "mode"
applicationIdSuffix ".premium"
}
minApi23 {
dimension "api"
versionNameSuffix "-minApi23"
}
minApi21 {
dimension "api"
versionNameSuffix "-minApi21"
}
}
}
```
In this setup, the following values are valid `--flavor` are valid `freeMinApi21`, `freeMinApi23`, `premiumMinApi21`, and `premiumMinApi23`. We call these values "flavor combinations". Consider the following from the Android documentation[^1]:
> In addition to the source set directories you can create for each individual product flavor and build variant, you can also create source set directories for each combination of product flavors. For example, you can create and add Java sources to the src/demoMinApi24/java/ directory, and Gradle uses those sources only when building a variant that combines those two product flavors.
>
> Source sets you create for product flavor combinations have a higher priority than source sets that belong to each individual product flavor. To learn more about source sets and how Gradle merges resources, read the section about how to [create source sets](https://developer.android.com/build/build-variants#sourcesets).
This feature will not behave in this way. If a user utilizes this feature and also Android's multidimensional flavors feature, they will have to list out all flavor combinations that contain the flavor they want to limit an asset to:
```yaml
assets:
- assets/free/
flavors:
- freeMinApi21
- freeMinApi23
```
This is mostly due to a technical limitation in the hot-reload feature of `flutter run`. During a hot reload, the tool will try to update the asset bundle on the device, but the tool does not know the flavors contained within the flavor combination (that the user passes to `--flavor`). Gradle is the source of truth of what flavors were involved in the build, and `flutter run` currently does not access to that information since it's an implementation detail of the build process. We could bubble up this information, but it would require a nontrivial amount of engineering work, and it's unclear how desired this functionality is. It might not be worth implementing.
</details>
See https://flutter.dev/go/flavor-specific-assets for the (outdated) design document.
<summary>Pre-launch Checklist</summary>
</details>
[^1]: https://developer.android.com/build/build-variants#flavor-dimensions
Reverts flutter/flutter#136562
Initiated by: vashworth
This change reverts the following previous change:
Original Description:
Some of our tests in CI are triggering the `NSLocalNetworkUsageDescription` dialog when they're not supposed to (https://github.com/flutter/flutter/issues/129836) since it's disabled via flags (`--no-publish-port` for flutter/flutter and `--disable-vm-service-publication` for flutter/engine).
Normally, we inject `NSLocalNetworkUsageDescription` (and other bonjour settings) to the Info.plist during the project build for debug and profile mode since by default they will publish the VM Service port over mDNS.
To help diagnose the issue, though, this PR changes it so that we don't inject `NSLocalNetworkUsageDescription` (and other bonjour settings) when port publication is disabled since it shouldn't be needed. Hopefully, this will give us better error messages or cause the app to crash and end the test early (rather than timeout after 30 minutes).
Some of our tests in CI are triggering the `NSLocalNetworkUsageDescription` dialog when they're not supposed to (https://github.com/flutter/flutter/issues/129836) since it's disabled via flags (`--no-publish-port` for flutter/flutter and `--disable-vm-service-publication` for flutter/engine).
Normally, we inject `NSLocalNetworkUsageDescription` (and other bonjour settings) to the Info.plist during the project build for debug and profile mode since by default they will publish the VM Service port over mDNS.
To help diagnose the issue, though, this PR changes it so that we don't inject `NSLocalNetworkUsageDescription` (and other bonjour settings) when port publication is disabled since it shouldn't be needed. Hopefully, this will give us better error messages or cause the app to crash and end the test early (rather than timeout after 30 minutes).
So there appears to be a race situation between the flutter CLI and Xcode. In the CLI, we update the `CONFIGURATION_BUILD_DIR` in the Xcode build settings and then tell Xcode to install, launch, and debug the app. When Xcode installs the app, it should use the `CONFIGURATION_BUILD_DIR` to find the bundle. However, it appears that sometimes Xcode hasn't processed the change to the build settings before the install happens, which causes it to not be able to find the bundle.
Fixes https://github.com/flutter/flutter/issues/135442
---
Since it's a timing issue, there's not really a consistent way to test it.
I was able to confirm that it works, though, by using the following steps:
1. Create a flutter project
2. Open the project in Xcode
3. `flutter clean`
4. `flutter run --profile -v`
If I saw a print line `stderr: CONFIGURATION_BUILD_DIR: build/Debug-iphoneos`, that means it first found the old and incorrect `CONFIGURATION_BUILD_DIR` before updating to the the new, so I was able to confirm that it would wait until it updated.
Support for FFI calls with `@Native external` functions through Native assets on MacOS and iOS. This enables bundling native code without any build-system boilerplate code.
For more info see:
* https://github.com/flutter/flutter/issues/129757
### Implementation details for MacOS and iOS.
Dylibs are bundled by (1) making them fat binaries if multiple architectures are targeted, (2) code signing these, and (3) copying them to the frameworks folder. These steps are done manual rather than via CocoaPods. CocoaPods would have done the same steps, but (a) needs the dylibs to be there before the `xcodebuild` invocation (we could trick it, by having a minimal dylib in the place and replace it during the build process, that works), and (b) can't deal with having no dylibs to be bundled (we'd have to bundle a dummy dylib or include some dummy C code in the build file).
The dylibs are build as a new target inside flutter assemble, as that is the moment we know what build-mode and architecture to target.
The mapping from asset id to dylib-path is passed in to every kernel compilation path. The interesting case is hot-restart where the initial kernel file is compiled by the "inner" flutter assemble, while after hot restart the "outer" flutter run compiled kernel file is pushed to the device. Both kernel files need to contain the mapping. The "inner" flutter assemble gets its mapping from the NativeAssets target which builds the native assets. The "outer" flutter run get its mapping from a dry-run invocation. Since this hot restart can be used for multiple target devices (`flutter run -d all`) it contains the mapping for all known targets.
### Example vs template
The PR includes a new template that uses the new native assets in a package and has an app importing that. Separate discussion in: https://github.com/flutter/flutter/issues/131209.
### Tests
This PR adds new tests to cover the various use cases.
* dev/devicelab/bin/tasks/native_assets_ios.dart
* Runs an example app with native assets in all build modes, doing hot reload and hot restart in debug mode.
* dev/devicelab/bin/tasks/native_assets_ios_simulator.dart
* Runs an example app with native assets, doing hot reload and hot restart.
* packages/flutter_tools/test/integration.shard/native_assets_test.dart
* Runs (incl hot reload/hot restart), builds, builds frameworks for iOS, MacOS and flutter-tester.
* packages/flutter_tools/test/general.shard/build_system/targets/native_assets_test.dart
* Unit tests the new Target in the backend.
* packages/flutter_tools/test/general.shard/ios/native_assets_test.dart
* packages/flutter_tools/test/general.shard/macos/native_assets_test.dart
* Unit tests the native assets being packaged on a iOS/MacOS build.
It also extends various existing tests:
* dev/devicelab/bin/tasks/module_test_ios.dart
* Exercises the add2app scenario.
* packages/flutter_tools/test/general.shard/features_test.dart
* Unit test the new feature flag.
*Replace this paragraph with a description of what this PR is changing or adding, and why. Consider including before/after screenshots.*
*List which issues are fixed by this PR. You must list at least one issue.*
*If you had to change anything in the [flutter/tests] repo, include a link to the migration guide as per the [breaking change policy].*
Partial work towards https://github.com/flutter/flutter/issues/132245.
Other than updating error messages, and passing `$LOCAL_ENGINE_HOST`
downwards, this PR should not change the behavior of any existing
workflows or code (i.e. it's purely additive).
This PR includes the following changes. These changes only apply to iOS 17 physical devices.
| Command | Change Description | Changes to User Experience |
| ------------- | ------------- | ------------- |
| `flutter run --release` | Uses `devicectl` to install and launch application in release mode. | No change. |
| `flutter run` | Uses Xcode via automation scripting to run application in debug and profile mode. | Xcode will be opened in the background. Errors/crashes may be caught in Xcode and therefore may not show in terminal. |
| `flutter run --use-application-binary=xxxx` | Creates temporary empty Xcode project and use Xcode to run via automation scripting in debug and profile. | Xcode will be opened in the background. Errors/crashes may be caught in Xcode and therefore may not show in terminal. |
| `flutter install` | Uses `devicectl` to check installed apps, install app, uninstall app. | No change. |
| `flutter screenshot` | Will return error. | Will return error. |
Other changes include:
* Using `devicectl` to get information about the device
* Using `idevicesyslog` and Dart VM logging for device logs
Note:
Xcode automation scripting (used in `flutter run` for debug and profile) does not work in a headless (without a UI) interface. No known workaround.
Fixes https://github.com/flutter/flutter/issues/128827, https://github.com/flutter/flutter/issues/128531.
* [flutter_tools] Add support for URI formats like ?line=x for "flutter test"
* Remove unnecessary function
* Handle parsing absolute paths on Windows
* Use Windows-style paths when running on Windows
* Fix paths in isFile
* Remove unnecessary clear
* Add new macos target configured for flavors
* Rename Free App copy-Info.plist to Free App Info.plist
* Remove bogus entitlements
* Remove Generated.xcconfig
* Audit project.pbxproj
* Remove unused configs
* share one info.plist
* Modify scheme so that paid app works
* Codesign automatic
* Pipe flavor as scheme into xcodebuild
* Ignore incoming flavor string
* pipe flavor for flutter run to work
* Add devicelab tests
* Error if host and target device are same for flutter install desktop
* Avoid bang (!) by promoting a local.
Co-authored-by: Jenn Magder <magder@google.com>
* Add supportsInstall property
* Override in test classes
* Add install test on macOS
* Refactor application_package and add tests for package directory
Co-authored-by: a-wallen <stephenwallen@google.com>
Co-authored-by: Jenn Magder <magder@google.com>
Increases the minimum macOS deployment target from macOS 10.13 (High Sierra) to 10.14 (Mojave) in the macOS app templates.
Includes:
* Update migration for macOS 10.11 apps to upgrade to 10.14
* Adds migration for macOS 10.13 apps to upgrade to 10.14
* Apply migration to all examples, and integration tests
This does not increase version in the plugin templates since those will need to wait until the 10.14 framework rolls to stable channel, so new plugins can build with apps created with `flutter create` on stable channel.
Issue: https://github.com/flutter/flutter/issues/114445
See RFC: http://flutter.dev/go/flutter-drop-macOS-10.13-2022-q4
See previous patch: https://github.com/flutter/flutter/pull/107689
* Migrate packages/flutter_tools/bin
* Fix NPE
* Fix test
* Fix test
* Fix l10n optionalParameters
* Fix ChromeTab nullability
* Fix another type cast error
* Fix another cast error
* Fix another cast error (copied from #110711)
* Fix NPE
* Fix another NPE
* Assert that testDirectory is not null
Speedup coverage test runs by using (new) coverage handle with caching.
On a `flutter test --coverage` run on `packages/flutter` the runtime goes from ~828 seconds to ~617 seconds, or a ~25% reduction in time spent (testing without coverage takes ~236 seconds so the overhead of `--coverage` in this case goes from ~592 seconds to ~381 seconds, or a ~35% reduction).
In https://github.com/flutter/flutter/pull/103771, we rolled
dependencies in Flutter, which triggered an update of package:coverage
to v1.3.1. The new version includes
https://github.com/dart-lang/coverage/pull/370 in which two deprecations
landed:
* The `Resolver` default constructor was deprecated and replaced with
the `Resolver.create` static factory method, which unfortunately
happens to be async.
* The `packagesPath` parameter to `HitMap.parseJson`, which takes the
path to the `.packages` file of the package for which coverage is to
be collected, was deprecated. This parameter was replaced with
`packagePath` in https://github.com/dart-lang/coverage/pull/370 which
was part of the overall deprecation of the .packages file in Dart
itself https://github.com/dart-lang/sdk/issues/48272. The overall goal
being that end-user code shouldn't need to know about implementation
details such as whether dependency information is stored in a
.packages file or a package_info.json file, but rather use the
package_config package to obtain the package metadata and perform
other functions such as resolving its dependencies to filesystem
paths. packagesPath was replaced by packagePath, which takes the path
to the package directory itself. Internally, package:coverage then
uses package_config to do the rest of the package/script URI
resolution to filesystem paths.
This migrates off the deprecated `packagesPath` parameter to the
replacement `packagePath` paramter.
Issue: https://github.com/flutter/flutter/issues/103830
* Use libraryFilters flag to speed up coverage collection
* Allow libraryNames to be null
* Unconditionally enable the reportLines flag
* Fix analysis errors
