Checksum validation is intended only as a performance improvement.
Checksum de-serialization errors (typically framework version mismatch) are
expected on framework updates and shouldn't be user-visible except for
informational purposes when --verbose is set.
Adds the app entrypoint as a key in the checksum file.
This change eliminates the assumption that checksummed files change when
the main entrypoint changes. In the case where there are two
entrypoints, a.dart and b.dart and a.dart imports b.dart and b.dart
imports a.dart, building the app with entrypoint a.dart followed by a
build of the app with entrypoint b.dart would result in the same
files list and checksums, but should invalidate the build.
Extract a Snapshotter class that can be shared between FLX snapshotting,
AOT snapshotting, and assembly AOT snapshotting. Allows for better
testability of snapshotting logic.
* Extracts script snapshotting used in FLX build.
* Adds tests for snapshot checksumming, build invalidation/skipping.
Remaining work: disentangle + extract AOT snapshotting and Assembly AOT
snapshotting logic from build_aot.dart.
This change re-introduces skipping AOT snapshot builds if input sources
and outputs have not changed since the last snapshot build, assuming a
build for the same platform in the same build mode.
This reverts commit 3d5afb5a81.
It includes the following changes relative to the original:
1. Include the entrypoint source in the checksums
2. include the build mode in the checksums
3. include the target platform in the checksums
This change ensures that snapshot build checksums used to avoid
duplicate builds are invalidated by a change to framework revision
(in case gen_snapshot is updated), as well as by build mode.
Currently, only FLX snapshotting uses checksums to avoid duplicate
builds. FLX snapshotting is always done with BuildMode.debug, so didn't
include build mode in the checksum file.
* Revert "Fix a typo in the saved certificate error message (#11640)"
This reverts commit bfda885a9d.
* Revert "Rollback patch that broke microbenchmarks (#11616)"
This reverts commit 70fe6f4c23.
* Revert "Extract snapshotting logic to Snapshotter class (#11591)"
This reverts commit 309a2d78fb.
* Revert "Minor whitespace formatting fix (#11590)"
This reverts commit bf69c3c69b.
* Revert "Avoid rebuilding snapshots if no change to source (#11551)"
This reverts commit 74835db563.
This change re-introduces skipping snapshot builds if input sources (and
outputs) have not changed since the last snapshot build, with a bugfix
to include the entry-point source in the checksum used to check whether
rebuild can be skipped. This ensures that the following sequence
invalidates the cached build, resulting in two snapshot builds:
flutter build ios lib/foo.dart
flutter build ios lib/bar.dart
This reverts commit 3d5afb5a81.
* Include the process' `stdout` and `stderr` when it returns a
non-zero exit code in `runCheckedAsync()`
* Defensively catch errors in `AndroidDevice.isAppInstalled()`
and return false
Previously, the snapshot file was recomputed on every build. We now
record checksums for all snapshot inputs (which are catalogued in the
snapshot dependencies file output alongside the snapshot) and only
rebuild if the checksum for any input file (or the previous output file) has
changed.
Previously, the snapshot file was recomputed on every build. We now
record checksums for all snapshot inputs (which are catalogued in the
snapshot dependencies file output alongside the snapshot) and only
rebuild if the checksum for any input file has changed.
* first pass
* improvements
* extract terminal.dart
* rebase
* add default terminal to context
* The analyzer wants the ../ imports in front of the ./ imports
* review notes
Eagerly generate local.properties, and always update the flutter.sdk
setting in it, in case FLUTTER_ROOT has changed.
Fixes#8365.
Fixes#9716 - at least the specific issue reported. My Android Studio
still complains about Gradle versions - it ships with v3.2, but requires
v3.3...
Add a 'generate dependencies' task to the Gradle build, which checks if
the snapshot dependencies file exists, and runs an extra build before
the actual FlutterTask if it doesn't. This makes the first build slower,
but sub-sequent builds (without source changes) much faster.
Fixes#9717.
FlutterCommand.runCommand subclasses can optionally return a FlutterCommandResult which is used to append additional analytics.
Fix flutter run timing report and add a bunch of dimensional data
`adb` can sometimes hang, which will in turn hang the Dart isolate if
we're using `Process.runSync()`. This changes many of the `Device` methods
to return `Future<T>` in order to allow them to use the async process
methods. A future change will add timeouts to the associated calls so
that we can properly alert the user to the hung `adb` process.
This is work towards #7102, #9567
The very first time `pod install` is invoked, CocoaPods downloads the master spec repository, which takes quite a while. Before this change, the build appeared to have stalled. With this change, at least the spinner is moving.
Added `pod setup` to the install instructions for CocoaPods, so the spec repo is downloaded while setting up Flutter, instead of during the first build.
The old `whichAll` implementation was not considering different extensions for executables on Windows. By defering to OS-built-in tools we avoid implementing it.
Fixes#8882.
The problem has been fixed upstream in the Dart VM.
This simplifies our setup instructions on Windows (will update the wiki).
Furthermore, this also means that going forward there is no diffrence between PowerShell and Cmd for the Flutter experience on Windows.
Function keys don't work great on any platform we support:
* Mac doesn't have first-class function keys.
* On Ubuntu: F1 opens the system help and F10 opens the file dialog.
* ... and Windows is a mess as well.
* Make ProcessSignals portable
This removes the need to wrap unsupported signals with in `if (!platform.isWindows) ..`.
It also allows us to implement a work around for breaking the Windows console when flutter is exited with Ctrl+C.
* review comments
* adding tests
* add license header
1. Add `PortScanner` abstraction so that we don't do actual port scanning
in tests.
2. Don't change the real `cwd` of the isolate during tests, as it affects
all tests, not just the current running test.
Fixes#8761
* Revert "Eliminate CocoaPods install step (#8694)"
This reverts commit f4a13bc72b.
If the developer is relying on CocoaPods and hasn't done a pod install, we will do it for them. This is needed for a smooth native plugin experience, similar to what Gradle is doing on the Android side.
There's no hard dependency on CocoaPods. We only run pod install if the project uses CocoaPods, so developers are still free to use alternatives if they prefer (and if they don't want to use native plugins).
Fixes#8685Fixes#8657Fixes#8526
* Require CocoaPods 1.0.0 or newer.
And make sure we don't get a crash if running `pod install` fails.
* Address review feedback
If the developer is relying on CocoaPods and hasn't done a pod install,
they'll get a build failure indicating the issue.
This also avoids a hard dependency on CocoaPods in the tool and allows
developers to customize their Xcode steps to use alternatives such as
Carthage if they prefer.
Since iOS builds are CocoaPods enabled by default, we should make sure to run `pod install` to get pods wired up before building the app.
Also added a check to `flutter doctor` to verify CocoaPods is installed.
I'm passing FLUTTER_FRAMEWORK_DIR to the `pod install` command, so we can have the app's Podfile link in Flutter.framework as a pod instead of having to copy it over in xcode_backend.sh.
This adds support for a `--bug-report` flag, which is a recording
that:
- includes the arguments that were passed to the command runner
- is zipped up for easy attachment in Guthub issues
It's not just $HOME/.AndroidStudio2.2, it might also be
.AndroidStudioPreview2.3, or .AndroidStudioFooBar1.7, or whatever.
Made the Version parser less throw-happy, and relaxed the directory name
checks to allow for the above.
Fixes#8353.
* Fix bug parsing Gradle version.
Version from pub_semver requires versions of the format X.Y.Z. Gradle
doesn't follow semantic versioning, though, so version parsing would
fail on versions like '3.2'. Fixed by writing a custom Version class.
Also removed a check for apksigner when building Gradle-based projects.
Fixes#8298
If ensureDirectoryExists fails -- e.g. because a file file of the same
name as the directory to be created exists, ensure that we exit cleanly
with a useful error message.
* Change file_system’s copy folder to copy director which takes into account the file system
* Address review comments.
Test with 2 different instances of file systems.
As of Dart SDK 1.22.0-dev.5.0, `Process.exitCode` is no longer
mutable (that SDK version picks up e5a16b1ca5).
This change allows the tools code to pass analysis in sdk versions both
before and after that change, to allow for analysis against both the host and
target sdks.
This removes direct file access from within flutter_tools
in favor of using `package:file` via a `FileSystem` that's
accessed via the `ApplicationContext`.
This lays the groundwork for us to be able to easily swap
out the underlying file system when running Flutter tools,
which will be used to provide a record/replay file system,
analogous to what we have for process invocations.
This fixes an infinite loop in the code that walks the parent
context chain looking for a variable.
This also includes a fix in build_info.dart whereby if the context
is set but the config is not yet set, we were trying to dereference
null.
This argument will enable mocking of os-layer process invocations,
where the mock behavior will come from replaying a previously-
recorded set of invocations. At the point of process invocation,
the key metadata for the invocation will be looked up in the
recording's manifest, and iff a matching record exists in the
manifest, the process will be mocked out with data derived from
the corresponding recorded process (e.g. stdout, stderr, exit code).
* Add --record-to option to flutter tools
This option will cause flutter tools to record all process
invocations that occur and serialize their stdout and stderr
to files that get added to a "recording" ZIP file. This is
part of an effort to be able to test flutter tools in a hermetic
environment.
As a side-benefit, this recording should prove an excellent
attachment to any bug report.
With this change, they're run via instance methods on an object
obtained through the context. This will allow us to substitute
that object in tests with replay/record versions to allow us to
mock out the os-layer in tests.
* Remove the workaround that pinned args to v0.13.6
This reverts most of the changes in commit 6331b6c8b5
* throw exception if exit code is not an integer
* rework command infrastructure to throw ToolExit when non-zero exitCode
* convert commands to return Future<Null>
* cleanup remaining commands to use throwToolExit for non-zero exit code
* remove isUnusual exception message
* add type annotations for updated args package
* convert pubGet to throw ToolExit on non-zero exit code
* convert commandValidator to throw ToolExit for non-zero exit code
* convert flutter commands to throw ToolExit for non-zero exit code
* use convenience method throwToolExit
* only show "if this problem persists" for unusual exceptions
- [x] Remove the second full-sync on startup.
- [x] Always invoke the snapshotter to determine the minimal set of Dart sources used.
- [x] Only synchronize the *used* Dart sources to DevFS.
- [x] Detect syntax / file missing errors on the host and gate reloads / restarts.
With the old policy the most recent log would not be printed until the next
log is produced (which may be indefinitely). This change prints logs
immediately along with a time delta since the previous log.
This change adds a top-level getBuildDirectory func and funcs for
android, aot, asset, ios build products.
Developers may now add a "build-dir" mapping to their
~/.flutter_settings (JSON format) config file. Output directory is
relative to the main flutter application directory.
This change also changes the default build directory for iOS builds to a
subdirectory of the configured build directory, 'build/ios' by default.
* General improvoments to the loader app:
* Show a message after 8 seconds if no connection comes in.
* Show a progress bar as files are being uploaded.
* Hide the spinner just before launching the application.
* General improvements to the "flutter run" UI:
* Add "?" key as a silent alias for "h".
* Make the help text bold so it doesn't get mixed with the logs.
* Make "R" do a cold restart when hot reload is enabled.
* Supporting features and bug fixes:
* Add support for string service extensions.
* Other bug fixes:
* Expose debugDumpRenderTree() outside debug mode.
* Logger.supportsColor was missing a getter.
* Mention in the usage docs that --hot requires --resident.
* Trivial style fixes.
Also, make it clear the screen between results so it's more obvious
what's going on when you have new results (especially when you have
fixed everything).
* refactor the --resident run option into a separate file
* update daemon to run --resident apps
* re-plumbing daemon start
* send app logs
* update tests
* review changes
* fix test runner
* remove PackageMap.createGlobalInstance; rely on the ctor
* review comments
* working on making a faster flutter run restart
* clean up todos; fire events on isolate changes
* use the Flutter.FrameworkInitialization event
* review comments
* rename service_protocol.dart to protocol_discovery.dart
* add a wrapper around the obs. protocol
* use json-rpc in run
* consolidate obs. code; implement flutter run --benchmark
* review comments
* more terse flutter upgrade
* fix an issue when updating and the engine update code has changed
* call flutter precache; add a --no-color hidden option
* fix a lint related to getters/setters
flutter start's method of finding devices to run the app on is not suitable for flutter drive.
This commit also refactors several tool services to allow mocking in unit tests.
"flutter create" adds option `--with-driver-test` that adds
dependencies to `flutter_driver` in `pubspec.yaml` and creates
a basic driver test runnable via `flutter drive
--target=test_driver/e2e.dart`
"flutter drive" new options:
- `--keep-app-running` tells the driver to not stop the app after tests
are done
- `--use-existing-app` tells the driver to not start a new app but use
an already running instance
Runs a test app and a driver test simultaneously, then stops the app.
Usage:
```
flutter drive --target=/path/to/test/app.dart
```
This command will look for `/path/to/test/app_test.dart` by
convention. We will expand into other ways of discovering tests in the
future.
