Removes these two discontinued plugins from `dev/integration_tests/flutter_gallery`
[`device_info`](https://pub.dev/packages/device_info):
Apparently the video playback doesn't work on iOS simulators (I wasn't able to verify this, as I don't have an iOS simulator installed). I removed the guard against running on those simulators, and replaced with a note in the README.
[`connectivity`](https://pub.dev/packages/connectivity):
This plugin was used to play the bee video from the network. I changed the demo so that the bee video is instead also played from an asset (like its friend the butterfly), and then removed the use of the plugin.
Unblocks the re-land of https://github.com/flutter/engine/pull/53462 (itself a reland ð), because of https://github.com/flutter/flutter/pull/150465#issuecomment-2181403712.
Initial tap is missing sometimes; either its never delivered or it is
delivered before gesture controller is hooked up.
1: Update MemoryTest to have option `requiresTapToStart` guarding the
new paths
2: Update the two perf tests that appear to be flaky to output when
TAPPED is received
3: Update the MemoryTest to keep tapping while waiting for TAPPED
Tested on devicelab:
* setting iterations=1
* removing the timeout before READY
* running tests in a while loop
Before this change, you could get the test to hang often. After this
change you'll see "tapping device... [x]" where x is the counter.
Fixes https://github.com/flutter/flutter/issues/150096
Reverts: flutter/flutter#150287
Initiated by: jtmcdole
Reason for reverting: other memperf tests don't wait for or send a TAPPED; so they fail.
Original PR Author: jtmcdole
Reviewed By: {gaaclarke}
This change reverts the following previous change:
Initial tap is missing sometimes; either its never delivered or it is delivered before gesture controller is hooked up.
1: Update the two perf tests to output when TAPPED is received
2: Update the MemoryTest to keep tapping while waiting for TAPPED
Tested on devicelab:
* setting iterations=1
* removing the timeout before READY
* running tests in a while loop
Before this change, you could get the test to hang often. After this change you'll see "tapping device... [x]" where x is the counter.
Fixes#150096
Initial tap is missing sometimes; either its never delivered or it is delivered before gesture controller is hooked up.
1: Update the two perf tests to output when TAPPED is received
2: Update the MemoryTest to keep tapping while waiting for TAPPED
Tested on devicelab:
* setting iterations=1
* removing the timeout before READY
* running tests in a while loop
Before this change, you could get the test to hang often. After this change you'll see "tapping device... [x]" where x is the counter.
Fixes#150096
Reverts: flutter/flutter#142942
Initiated by: zanderso
Reason for reverting: Seems to have affected iOS platform view focus: https://ci.chromium.org/ui/p/flutter/builders/prod/Mac_ios%20native_platform_view_ui_tests_ios/10626/overview
Original PR Author: gspencergoog
Reviewed By: {yjbanov, goderbauer, chunhtai}
This change reverts the following previous change:
## Description
This causes the `Focus` widget to request focus on its focus node if the accessibility system (screen reader) focuses a widget via the `SemanticsAction.focus` action.
## Related Issues
- https://github.com/flutter/flutter/issues/83809
## Tests
- Added a test to make sure that focus is requested when `SemanticsAction.focus` is sent by the engine.
## Description
This causes the `Focus` widget to request focus on its focus node if the accessibility system (screen reader) focuses a widget via the `SemanticsAction.focus` action.
## Related Issues
- https://github.com/flutter/flutter/issues/83809
## Tests
- Added a test to make sure that focus is requested when `SemanticsAction.focus` is sent by the engine.
Manual recreation of https://github.com/flutter/flutter/pull/148911
Entire PR is just the output of
```
flutter update-packages --force-upgrade
```
followed by (run from the root of the flutter repo)
```
find . -type d -name 'android' | dart dev/tools/bin/generate_gradle_lockfiles.dart --no-gradle-generation --no-exclusion
```
This PR adds support invoking `link.dart` hooks.
Link hooks can add new assets. Link hooks can transform assets sent to link hook from build hooks.
This PR does not yet add support for getting tree-shake information in the link hooks. This is pending on defining the `resources.json` format (https://github.com/dart-lang/sdk/issues/55494).
Issue:
* https://github.com/flutter/flutter/issues/146263
## Implementation considerations
The build hooks could be run before Dart compilation and the link hooks after Dart compilation. (This is how it's done in Dart standalone.) However, due to the way the `Target`s are set up, this would require two targets and serializing and deserializing the `BuildResult` in between these. This would lead to more code but no benefits. Currently there is nothing that mandates running build hooks before Dart compilation.
## Testing
* The unit tests verify that the native_assets_builder `link` and `linkDryRun` would be invoked with help of the existing fake.
* The native assets integration test now also invokes an FFI call of a package that adds the asset during the link hook instead of the build hook.
* In order to keep coverage of the `flutter create --template=package_ffi`, `flutter create` is still run and the extra dependency is added and an extra ffi call is added. (Open to alternative suggestions.)
This test was outputting the "success" string multiple times, which is probably causing the harness to kill the app halfway through its cycle. I suspect this is causing some of the flakiness we've seen of this test. Instead, we should just output the string at the very end of the test, right before the app is done.
### fixes#136139
<br>
<details open> <summary><b>getting sentimental in the PR description</b> (click to collapse)<br><br></summary>
The past 7 months have been quite the journeyâI made some huge blunders and some huge accomplishmentsâa very fun time overall.
I really appreciate the people who took the time to perform code review for my refactoring shenanigans: **christopherfujino**, **andrewkolos**, **LongCatIsLooong**, **gspencergoog**, **loic-sharma**, **Piinks**, **bernaferrari**, **bartekpacia**, **bleroux**, **kevmoo**, **rakudrama**, **XilaiZhang**, **QuncCccccc**, **MominRaza**, and **victorsanni**.
And a huge shoutout to 2 individuals:
- @justinmc, for offering to sponsor me for commit access (words could not describe my excitement)
- @goderbauer, for being super duper proactive and consistent with code review
<br>
</details>
This pull request makes 13 "switch statements â switch expressions" PRs in total, reducing the LOC in this repo by **1,974**!
From now on, I'll make sure to request a test exemption for each refactoring PR ð
PR #147801 introduced some convenient `AnimationStatus` getters, but I just realized that `AnimationController` now has 2 getters for the same thing: `isAnimating` and `isRunning`.
The intent of this pull request is to correct that mistake, and implement the getters in the appropriate places.
This PR is step 12 in the journey to solve issue #136139 and make the
entire Flutter repo more readable.
Most of it involves implementing switch expressions, and there's also a
few other random things that I wanted to clean up a bit.
Prepares for a fix to the `use_build_context_synchronously` lint (https://dart-review.googlesource.com/c/sdk/+/365541) that will complain about these unsafe usages.
The lint rule cannot tell that the `mounted` field is shorthand for `context.mounted`.
DDS was temporarily pinned to 4.1.0 because 4.2.0 triggered some test
failures (see https://github.com/flutter/flutter/pull/147250). Those
failures should be fixed by vm_service 14.2.2, so this unpins DDS and
rolls both of these packages (along with devtools_shared, which is a DDS
dependency).
(If the bot updates vm_service before this is done, I can rebase over
that will reduce the size of this PR to just a few files)
Some cause of jank on both Skia and Impeller are these massive images. We should just resize them so that the noise is reduced and we can see other performance issues.
Fixes https://github.com/flutter/flutter/issues/147797
Tested: this is a test!
## Description
This introduces a list of packages that we will explicitly not pin. It is to be used for things where the package isn't actually published, but is a transitive dependency of another package included in the SDK. This happens with the `macros` package, for instance, which depends on the private, unpublished, `_macros` package where the SDK does some tricky things to depend on it (it depends on "any", but ships it as part of the SDK).
Also ran `flutter update-packages --force-update` to update all of the pubspec files.
## Related Issues
- Fixes#147656
## Tests
- Added a test that makes sure that explicitly unpinned packages don't show up in the pinned list.
- added language for all code blocks
- replaced `bash` or `shell` with `sh` for consistency.
- added `sh` and `console` in the GitHub template link generator.
- updated test for GitHub template.
Here's another PR with a couple of typos fixed. As you can see there was a typo in _fileReferenceI**n**dentifiers_, in class _ParsedProjectInfo._ Maybe we should do some check on that since I'm not sure if that property is used somewhere outside Flutter?
Reverts: flutter/flutter#139164
Initiated by: chunhtai
Reason for reverting: hard breaking change
Original PR Author: chunhtai
Reviewed By: {justinmc}
This change reverts the following previous change:
Adds a generic type and pop result to popscope and its friend.
The use cases are to be able to capture the result when the pop is called.
migration guide: https://github.com/flutter/website/pull/9872
Adds a generic type and pop result to popscope and its friend.
The use cases are to be able to capture the result when the pop is called.
migration guide: https://github.com/flutter/website/pull/9872
This pull request aims for improved readability, based on issue #146600.
```dart
// before
Set<Color> _distinctVisibleColors() {
final Set<Color> distinctVisibleColors = <Color>{};
if (top.style != BorderStyle.none) {
distinctVisibleColors.add(top.color);
}
if (right.style != BorderStyle.none) {
distinctVisibleColors.add(right.color);
}
if (bottom.style != BorderStyle.none) {
distinctVisibleColors.add(bottom.color);
}
if (left.style != BorderStyle.none) {
distinctVisibleColors.add(left.color);
}
return distinctVisibleColors;
}
// after
Set<Color> _distinctVisibleColors() {
return <Color>{
if (top.style != BorderStyle.none) top.color,
if (right.style != BorderStyle.none) right.color,
if (bottom.style != BorderStyle.none) bottom.color,
if (left.style != BorderStyle.none) left.color,
};
}
```
Most of the repo should be covered in this PR (aside from `flutter_tools/`, since there was a lot going on in there).
The interface for `ArgResults` from `package:args` has added new fields. Change the implementations of these in the conductor to extend `Fake` so that these aren't analyzer errors.
This broke the pub roll here: https://github.com/flutter/flutter/pull/146642#issuecomment-2050169629
This adds support for adding the `--wasm` flag to `flutter run` and `flutter drive`
* Emits errors if you attempt to use the skwasm renderer without the `--wasm` flag
* Emits errors if you try to use `--wasm` when not using a web device
* Uses the skwasm renderer by default if you pass `--wasm` and no `--web-renderer`
Relands https://github.com/flutter/flutter/pull/146181.
Just 3 commits:
1. a revert of the revert
2. the fix described in https://github.com/flutter/flutter/pull/146181#issuecomment-2038238869
3. updating two postsubmit tests from Java 11 to 17, as that is required for this new AGP version.
I've verified that `flutter build apk --flavor paid --debug` fails in `dev/integration_tests/flavors/` with the error in ci without (2), and succeeds with it.
I've also verified that the `dev/benchmarks/complex_layout` app builds successfully with Java 17.
That covers all the postsubmits that failed according [to the dashboard](https://flutter-dashboard.appspot.com/#/build).
Reverts: flutter/flutter#146181
Initiated by: LongCatIsLooong
Reason for reverting: https://ci.chromium.org/ui/p/flutter/builders/prod/Windows_android%20flavors_test_win/11086/overview
Original PR Author: gmackall
Reviewed By: {reidbaker, christopherfujino}
This change reverts the following previous change:
Bump almost all tests to AGP 8.1 and Gradle 8.3
Flutter gallery is excluded, because it uses discontinued plugins that in turn use old Gradle versions, and that prevents upgrading. Will take some extra work to figure out what to do there.
Should bump templates next
Entire PR generated with the lockfile generation script, except for:
1. changes within `dev/integration_tests/gradle_deprecated_settings/android/`, which must be done manually (and exclusion of the gallery for reason mentioned above).
2. Changes to many `AndroidManifest.xml` files to remove the `package` attribute and instead set that same value in the `build.gradle`, in the `namespace` attribute of the `android` closure (corresponds to an AGP behavior change, see https://d.android.com/r/tools/upgrade-assistant/set-namespace).
3. Removes the use of the `battery` plugin in `android_embedding_v2_smoke_test` because the plugin is discontinued, unused, and blocks upgrading the AGP version for that app because the discontinued plugin itself uses a very old AGP version.
Bump almost all tests to AGP 8.1 and Gradle 8.3
Flutter gallery is excluded, because it uses discontinued plugins that in turn use old Gradle versions, and that prevents upgrading. Will take some extra work to figure out what to do there.
Should bump templates next
Entire PR generated with the lockfile generation script, except for:
1. changes within `dev/integration_tests/gradle_deprecated_settings/android/`, which must be done manually (and exclusion of the gallery for reason mentioned above).
2. Changes to many `AndroidManifest.xml` files to remove the `package` attribute and instead set that same value in the `build.gradle`, in the `namespace` attribute of the `android` closure (corresponds to an AGP behavior change, see https://d.android.com/r/tools/upgrade-assistant/set-namespace).
3. Removes the use of the `battery` plugin in `android_embedding_v2_smoke_test` because the plugin is discontinued, unused, and blocks upgrading the AGP version for that app because the discontinued plugin itself uses a very old AGP version.
This PR is to update material_color_utilities package version to the latest. `material_color_utilities/scheme/scheme_fruit_salad.dart` and `material_color_utilities/scheme/scheme_rainbow.dart` are exported after version 0.9.0.
Once this PR is merged, we don't need to explicitly import these two files like the change in PR #144805, which breaks some dependencies in `Google testing`.
This PR makes the static API of the `BackgroundIsolateBinaryMessenger` consistent between its web and IO implementations.
This way, multi-platform applications will compile for the web when using the `ensureInitialized` method (even though it'll throw at runtime, like the `instance` getter, because isolates are not supported on the web).
### Issues
* Fixes: https://github.com/flutter/flutter/issues/145260
* Adds support for `flutter test --wasm`.
* The test compilation flow is a bit different now, so that it supports compilers other than DDC. Specifically, when we run a set of unit tests, we generate a "switchboard" main function that imports each unit test and runs the main function for a specific one based off of a value set by the JS bootstrapping code. This way, there is one compile step and the same compile output is invoked for each unit test file.
* Also, removes all references to `dart:html` from flutter/flutter.
* Adds CI steps for running the framework unit tests with dart2wasm+skwasm
* These steps are marked as `bringup: true`, so we don't know what kind of failures they will result in. Any failures they have will not block the tree at all yet while we're still in `bringup: true`. Once this PR is merged, I plan on looking at any failures and either fixing them or disabling them so we can get these CI steps running on presubmit.
This fixes https://github.com/flutter/flutter/issues/126692
Reverts: flutter/flutter#145509
Initiated by: yusuf-goog
Reason for reverting: Failing builds, blocking tree.
Original PR Author: flutter-pub-roller-bot
Reviewed By: {fluttergithubbot}
This change reverts the following previous change:
This PR was generated by `flutter update-packages --force-upgrade`.
This pull request is part of the effort to solve issue #144903.
In the past, my efforts to reduce line length involved refactoring away from switch statements, but unlike [yesterday's PR](https://github.com/flutter/flutter/pull/144905), this one is full of switch statements that make things more concise!
This makes several changes to flutter web app bootstrapping.
* The build now produces a `flutter_bootstrap.js` file.
* By default, this file does the basic streamlined startup of a flutter app with the service worker settings and no user configuration.
* The user can also put a `flutter_bootstrap.js` file in the `web` subdirectory in the project directory which can have whatever custom bootstrapping logic they'd like to write instead. This file is also templated, and can use any of the tokens that can be used with the `index.html` (with the exception of `{{flutter_bootstrap_js}}`, see below).
* Introduced a few new templating tokens for `index.html`:
* `{{flutter_js}}` => inlines the entirety of `flutter.js`
* `{{flutter_service_worker_version}}` => replaced directly by the service worker version. This can be used instead of the script that sets the `serviceWorkerVersion` local variable that we used to have by default.
* `{{flutter_bootstrap_js}}` => inlines the entirety of `flutter_bootstrap.js` (this token obviously doesn't apply to `flutter_bootstrap.js` itself).
* Changed `IndexHtml` to be called `WebTemplate` instead, since it is used for more than just the index.html now.
* We now emit warnings at build time for certain deprecated flows:
* Warn on the old service worker version pattern (i.e.`(const|var) serviceWorkerVersion = null`) and recommends using `{{flutter_service_worker_version}}` token instead
* Warn on use of `FlutterLoader.loadEntrypoint` and recommend using `FlutterLoader.load` instead
* Warn on manual loading of `flutter_service_worker.js`.
* The default `index.html` on `flutter create` now uses an async script tag with `flutter_bootstrap.js`.
We should always target the newest, and 34 is the newest. This isn't a requirement yet (like it is for 33+) but presumably it will be made required in the nearish future.
Originally, my aim was just to refactor (as per usual), but while messing around with the `TableBorder.symmetric` constructor, I realized that `borderRadius` was missing!
This pull request makes a few class constructors more efficient, and it fixes#144277 by adding the missing parameter.
<br>
## Description
This PR simplifies one external link in a commented section of the Android manifest template.
## Related Issue
Fixes https://github.com/flutter/flutter/issues/144249
## Tests
Documentation only PR.
