This attempts to re-land #22656.
There are two changes from the original:
I turned off wrapping completely when not sending output to a terminal. Previously I had defaulted to wrapping at and arbitrary 100 chars in that case, just to keep long messages from being too long, but that turns out the be a bad idea because there are tests that are relying on the specific form of the output. It's also pretty arbitrary, and mostly people sending output to a non-terminal will want unwrapped text.
I found a better way to terminate ANSI color/bold sequences, so that they can be embedded within each other without needed quite as complex a dance with removing redundant sequences.
As part of these changes, I removed the Logger.supportsColor setter so that the one source of truth for color support is in AnsiTerminal.supportsColor.
* Turn on line wrapping again in usage and status messages, adds ANSI color to doctor and analysis messages. (#22656)
This turns on text wrapping for usage messages and status messages. When on a terminal, wraps to the width of the terminal. When writing to a non-terminal, wrap lines at a default column width (currently defined to be 100 chars). If --no-wrap is specified, then no wrapping occurs. If --wrap-column is specified, wraps to that column (if --wrap is on).
Adds ANSI color to the doctor and analysis output on terminals. This is in this PR with the wrapping, since wrapping needs to know how to count visible characters in the presence of ANSI sequences. (This is just one more step towards re-implementing all of Curses for Flutter. :-)) Will not print ANSI sequences when sent to a non-terminal, or of --no-color is specified.
Fixes ANSI color and bold sequences so that they can be combined (bold, colored text), and a small bug in indentation calculation for wrapping.
Since wrapping is now turned on, also removed many redundant '\n's in the code.
This turns on text wrapping for usage messages and status messages. When on a terminal, wraps to the width of the terminal. When writing to a non-terminal, wrap lines at a default column width (currently defined to be 100 chars). If --no-wrap is specified, then no wrapping occurs. If --wrap-column is specified, wraps to that column (if --wrap is on).
Adds ANSI color to the doctor and analysis output on terminals. This is in this PR with the wrapping, since wrapping needs to know how to count visible characters in the presence of ANSI sequences. (This is just one more step towards re-implementing all of Curses for Flutter. :-)) Will not print ANSI sequences when sent to a non-terminal, or of --no-color is specified.
Fixes ANSI color and bold sequences so that they can be combined (bold, colored text), and a small bug in indentation calculation for wrapping.
Since wrapping is now turned on, also removed many redundant '\n's in the code.
This also involves switching from Core JIT to App JIT snapshot, and replacing per-isolate VM snapshot with the shared VM snapshot.
For now there is no separate update bundle file, as the generated update gets packaged directly into the APK for testing purposes.
Swap out the moon emoji used for progress spinner for a single-cell character.
The moon emoji looked cool, but couldn't be used because of bugs in xterm.js, used for VSCode's terminal, among others. The moon emoji is two character cells wide, but xterm.js doesn't advance by two cells when it adds the emoji, but does go back by two when it backspaces.
This changes us to a different character animation (dots) that is only one cell wide, and so doesn't have this problem.
This changes the compiler output for gradle to be less verbose and more easily read.
This only applies to compilation error messages: other gradle messages will continue to print as before.
It also fixes a small problem with the performance measurement printing (see that "7.1s" on it's own line in the original?) so that if something is expected to have multiple lines of output, it prints an initial line, and a "Done" line with the elapsed time, so that it's possible to know what the time applies to.
It also updates the spinner to be fancier, at least on platforms other than Windows (which is missing a lot of symbols in its console font).
Addresses #17307
This adds support to AnsiTerminal for colored output, and makes all tool output written to stderr (with the printError function) colored red.
No color codes are sent if the terminal doesn't support color (or isn't a terminal).
Also makes "progress" output print the elapsed time when not connected to a terminal, so that redirected output and terminal output match (redirected output doesn't print the spinner, however).
Addresses #17307
All temporary directory start with `flutter_` and have their random component separated from the name by a period, as in `flutter_test_bundle.YFYQMY`.
I've tried to find some of the places where we didn't cleanly delete temporary directories, too. This greatly reduces, though it does not entirely eliminate, the directories we leave behind when running tests, especially `flutter_tools` tests.
While I was at it I standardized on `tempDir` as the variable name for temporary directories, since it was the most common, removing occurrences of `temp` and `tmp`, among others.
Also I factored out some common code that used to catch exceptions that happen on Windows, and made more places use that pattern.
* Upgrade everything except matcher.
* Roll matcher (and test)
* Adjust tests that depend on flutter:test directly to depend on a shim
* Require use of package:test shim and remove other references to package:test
Disallow calling stop() or cancel() multiple times. This means that
when you use startProgress you have to more carefully think about what
exactly is going on.
Properly cancel startProgress in non-ANSI situations, so that
back-to-back startProgress calls all render to the console.
Disallow calling stop() or cancel() multiple times. This means that
when you use startProgress you have to more carefully think about what
exactly is going on.
Properly cancel startProgress in non-ANSI situations, so that
back-to-back startProgress calls all render to the console.
fuchsia_tester.dart still assumes Dart 1. Previously, it ran tests directly
from source, flutter_platform.dart automatically runs a kernel compile when
operating in Dart 2 mode, but this assumes a functional Dart SDK is available
in the artifacts directly, and fuchsia_tester.dart mocks out the artifacts
directory with an empty temp dir.
Remaining work is:
1. Get the frontend server building as a dependency on Fuchsia.
2. Patch fuchsia_tester.dart to use a valid Dart SDK and frontend server.
This also reverts migration to Dart 2 typedef syntax.
This reverts commit 6c56bb2. (#18362)
This reverts commit 3daebd0. (#18316)
Now that Dart 1 is turned off, reapplying my change to turn on the prefer_generic_function_type_aliases analysis option, and fix all the typedefs to Dart 2 preferred syntax.
Also eliminated the unused analysis_options_repo.yaml file and turned on public_member_api_docs in analysys_options.yaml.
No logic changes, just changing the typedef syntax for all typedefs, and updating analysis options.
* It's time to #deleteDart1 (#18293)
Eliminates support for Dart 1 in flutter_tools, and drops our Dart 1
benchmarks. All commands now run in Dart 1 mode only.
Eliminates --preview-dart-2 / --no-preview-dart-2 support.
* Fix indentation, remove no longer necessary .toList()
* Only push udpated kernel if >0 invalidated srcs
Eliminates support for Dart 1 in flutter_tools, and drops our Dart 1
benchmarks. All commands now run in Dart 1 mode only.
Eliminates --preview-dart-2 / --no-preview-dart-2 support.
Previously, in non-release (i.e. profile) AOT builds, we were setting
--no-checked and --conditional_directives flags. --no-checked is the
default, and we don't make use of conditional directives in Flutter.
Allows users of Fingerprinter to filter the set of paths collected from
the explicitly-specified paths and those collected from depfiles.
In some cases, depfiles are emitted with files that are not present on
the local disk (e.g. the frontend compiler currently emits buildbot
paths for the dart core libraries and dart:ui). These files will not
materially affect whether we need to re-run a build action for which
they are inputs, since they're not present in the filesystem and
therefore cannot change.
This replaces the --prefer-shared-library flag, which falls back to
regular (non-shared-lib) compile if the NDK is not found, with the
--build-shared-library flag, which exits with an error message if the
NDK is not found.
This simplifies the set of allowed code paths through AOT compile,
resulting in better testability and easier-to-follow logic. It also
results in more predictable behaviour for continuous integration and
other scenarios.
This change adds support for armv7, arm64, and universal iOS apps.
This change eliminates iOS target architecture hardcoding (previously
arm64 only) and uses the target architecture(s) specified in Xcode's
ARCHS setting ('Architectures' in Xcode Build Settings).
For universal binaries, set ARCHS to its default value, $(ARCHS_STANDARD).
Note that after changing the architecture in Xcode, developers should
run 'pod install' from the ios subdirectory of their project. A separate
change (that will land before this one) will add support for
automatically detecting project file and Podfile changes and re-running
pod install if necessary.
This change also adds an --ios-arch option to flutter build aot. In iOS
AOT builds (in profile and release mode), this dictates which
architectures are built into App.framework. This flag should generally
be unnecessary to set manually since flutter build aot is typically only
invoked internally by flutter itself.
