Various improvements (in particular a new painting fuzzer) to the text manual test.
Some additional documentation.
A fix to Stack to remove an LTR bias: make unpositioned children apply "alignment".
Some more debugging information on RichText and Text.
A fix to the flutter tool to not crash when an RPC call throws an exception.
Previously, the usage analytics would generate a write to the user's
HOME directory during the Fuchsia build. We're tightening down the
environment in which we run the Fuchsia build, and these writes are now
more obvious.
This patch removes the usage analytics during the Fuchsia build,
avoiding the write to the user's HOME directory.
* fix updrade script; upgrade to the latest package versions
* exclude special dependencies from transitive closure
* fix stack trace handling in flutter_test due to stack_trace change
* change type on _emptyStackTrace
The libimobiledevice suite of tools do not include version information.
A simple way to verify they meet our version requirements is to run
idevice_id -l, which will fail when older versions are run against iOS
devices with newer versions of iOS installed.
Unfortunately, idevice_id -l will also fail when libimobiledevice is up
to date, but the attached devices have never been paired with the host
machine in Xcode.
This patch updates the error message to help guide the user in such
situations.
On iOS 11.0.x ideviceinfo fails with the following message
ERROR: Could not connect to lockdownd, error code -3
This workaround should also work for #12330
This patch also makes it possible to create FLX files with no extension.
Previously, the zip tool would add the ".zip" extension if the output file
lacked an extension.
* Restructure hot mode test so it runs interactively.
This allows to add a benchmark for hot reload after actual source code change.
* Add curly braces, refactory copyRecursive
This reverts commit 5e7bcbacf8.
`flutter run --benchmark` was triggering a different quick bailout path in the VM than `flutter run`. The failure has been fixed upstream.
* Fix restart flow for preview-dart-2 mode.
Restart in preview-dart-2 needs to use kernel file and it has to be complete, rather than incremental kernel file.
* Add curly braces
* Do full compile on restart
* Roll engine to pick up changes to hot reload for preview-dart-2
The initial loading happens on the host, which was building a script snapshot and allowing imports of dart:mirrors. Hot reload happens on the device, which then notices the imports and issues a compile-time error. This change causes programs with imports of dart:mirrors to be rejected during the initial load.
Fixes https://github.com/flutter/flutter/issues/12440
* Add hotReloadInitialDevFSSyncMilliseconds to track how long user have to wait before being able to do first reload.
This stat is significantly different between existing and preview-dart-2 setting (for the latter, this stat is ~3x slower: 13s vs ~4s).
* Remove ws
* Cleanup timer-related code
This reverts commit 90028813a8.
This change caused a few bots to fail with 'JSON-RPC error 110: Extension error', which is odd because _getUnusedChangesInLastReload is not an extension.
This CL introduces 2 hidden options to 'flutter build aot' and 'flutter run' for passing arbitrary arguments to front-end server and to gen_snapshot tool when building and running flutter app in --profile or --release modes.
The ability to pass arbitrary options simplifies various experiments, as it removes the need to change defaults and rebuild flutter engine for every tested configuration.
* Add framework-side support for system text scale factor.
* Rolling engine to e3404b81a53ba3180c7623a6f2190ebb28518f30
Additional changes rolled in with engine change:
libtxt: implementation of GetRectsForRange that processes a line at a time - e3404b8
Provide an entropy source to the Dart engine (#4161) - e1aa867
libtxt: search for fallback fonts that can match emoji and CJK characters - 8061df1
Roll skia to e4679fa06a. (#4157) - 267e7a8
Update buildroot to 53fea9aebb (#4160) - 02ea7ae
Revert engine Dart roll. (#4158) - 14aab33
Add support for system text scale factor. (#4124) - b2a7f4b
Include _http into sky_engine libraries for analyzer (#4154) - b930f10
libtxt: Remove postprocess_line and improve tracking of X offsets - 86f95f0
libtxt: remove redundant line_widths (#4152) - 14bf515
Roll dart to ade37f931e90b0fdb8fe16d6bf6f089545da55b6 (#4151) - 6f1264f
This class lives in the Context and allows callers to "inject"
flag values, where flag values are first extracted from the
command arguments, then from the global arguments as a fallback.
This makes command validation happen as part of `verifyThenRunCommand()`,
using a newly introduced protected method (`validateCommand()`) rather than
a `commandValidator` property (that subclasses were responsible for manually
invoking).
* Pin all dependencies ONCE AND FOR ALL
This replaces the secret `flutter update-packages --upgrade` with a destructive `flutter update-packages --force-upgrade` that actually goes and pins every dependency and transitive dependency in every flutter package to the same version.
* Add comments.
* Allow FloatingActionButton to not have a heroTag.
* Allow FloatingActionButton to not have a child.
* Allow Tooltip to not have a child.
* Improve the debug output of the default FloatingActionButton hero tag.
* Improve the error message in the Hero clashing-tag case.
* Improve the debug output of the Hero widget.
* Improve the debug output of gesture-related widgets.
* Minor improvements to documentation.
* Fix some typos in comments.
* Fix some style nits.
1. Migrate simulator device log tailing to os_log toolchain
2. When the log tag (component) is available (iOS 11/Xcode 9), filter to
the set of log lines with tag 'Flutter'.
As of iOS 11 / Xcode 9, Flutter engine logs are no longer recorded in the
simulator's syslog file, which we previously read using tail -f. Instead
they're now accessible through Apple's new macOS/iOS os_log facility,
via /usr/bin/log, which supports a relatively flexible query language.
When run in non-interactive mode, /usr/bin/log buffers its output in 4k
chunks, which is significantly smaller than what's emitted up to the
point where the observatory/diagnostics port information is logged. As a
workaround we force it to run in interactive mode via the script tool.
* Add --trace-skia parameter to flutter run
Skia tracing is extremely useful for internal debug, but reduces the
amount of space available in the Dart Timeline buffers.
Disable skia tracing by default and expose them via the --trace-skia
flag.
* Roll Engine to 57a1445a45964d386500c39f5e8d06db060abadb
This was introduced to suppress libMobileGestalt noise originating from
libsystem_asl.dylib. Commit 39680ebfbd
suppresses all application log messages not originating from the
app/engine iteself on iOS 10 and above. Since the log message in
question is only emitted on devices running iOS >= 10.3.0, this
blacklist no longer necessary.
On iOS 10 and above, suppress engine log messages from system components
other than Flutter. This eliminates a large amount of keyboard/plugin
related noise during edit-refresh development.
Checksum validation is intended only as a performance improvement.
Checksum de-serialization errors (typically framework version mismatch) are
expected on framework updates and shouldn't be user-visible except for
informational purposes when --verbose is set.
ios-deploy 1.9.2 includes fixes for a common source of Xcode breakage
(flutter/flutter#4326) with Xcode 8.3.3 + iOS 10.3.3, and is required to
to support Xcode 9 (flutter/flutter#11875).
Opening Xcode is no longer sufficient to enable develop mode in Xcode 9.
Update the message to run the command-line tool. Alternatively users can
launch an app in the Xcode debugger to do this.
Adds the app entrypoint as a key in the checksum file.
This change eliminates the assumption that checksummed files change when
the main entrypoint changes. In the case where there are two
entrypoints, a.dart and b.dart and a.dart imports b.dart and b.dart
imports a.dart, building the app with entrypoint a.dart followed by a
build of the app with entrypoint b.dart would result in the same
files list and checksums, but should invalidate the build.
Fix a test for build invalidation due to a change in main entry point.
Previously this test's build was always invalidated to the the lack of a
previous snapshot (as well as the change in checksums). This change
ensures that the build is invalidated only due to the change in
checksums.
This patch migrates iOS device listing from using Xcode instruments to
using the libimobiledevice tools idevice_id and ideviceinfo.
ideviceinfo was previously incompatible with iOS 11 physical devices;
this has now been fixed.
In 37bb5f1300 flutter_tools migrated from
libimobiledevice-based device listing on iOS to using Xcode instruments
to work around the lack of support for iOS 11. Using instruments entails
several downsides, including a significantly higher performance hit, and
leaking hung DTServiceHub processes in certain cases when a simulator is
running, necessitating workarounds in which we watched for, and cleaned
up leaked DTServiceHub processes. This patch returns reverts the move to
instruments now that it's no longer necessary.
Extract a Snapshotter class that can be shared between FLX snapshotting,
AOT snapshotting, and assembly AOT snapshotting. Allows for better
testability of snapshotting logic.
* Extracts script snapshotting used in FLX build.
* Adds tests for snapshot checksumming, build invalidation/skipping.
Remaining work: disentangle + extract AOT snapshotting and Assembly AOT
snapshotting logic from build_aot.dart.
This change re-introduces skipping AOT snapshot builds if input sources
and outputs have not changed since the last snapshot build, assuming a
build for the same platform in the same build mode.
This reverts commit 3d5afb5a81.
It includes the following changes relative to the original:
1. Include the entrypoint source in the checksums
2. include the build mode in the checksums
3. include the target platform in the checksums
This change ensures that snapshot build checksums used to avoid
duplicate builds are invalidated by a change to framework revision
(in case gen_snapshot is updated), as well as by build mode.
Currently, only FLX snapshotting uses checksums to avoid duplicate
builds. FLX snapshotting is always done with BuildMode.debug, so didn't
include build mode in the checksum file.
During FLX snapshotting, changes to (or absence of) any of the following
should trigger re-snapshot:
1. main() entrypoint source
2. transitive closure of sources reachable from the entrypoint source
3. the output snapshot
This patch supports basic filtering of log lines from physical iOS
devices, similar to existing functionality for iOS simulator logging.
This patch also suppresses the following two log messages which are
emitted at app startup on iOS 10.3 devices:
libMobileGestalt MobileGestaltSupport.m:153: pid 123 (Runner) does not have sandbox access for frZQaeyWLUvLjeuEK43hmg and IS NOT appropriately entitled
libMobileGestalt MobileGestalt.c:550: no access to InverseDeviceID (see <rdar://problem/11744455>)
Allows the user to specify the kind of project to create. The default is 'app'. Other choices are 'plugin' (the old '--plugin' behavior), and 'package'.
A Flutter 'package' is a Dart package that depends on Flutter, but does not contain native code.
Fixes#10377.
Bare bones widget inspector support.
Toggle the widget inspector from the flutter tool by pressing 'i'.
When the widget inspector is select mode:
Pointer down to to inspect a widget.
Pointer click to finalize selection of a widget. You can now interact
with the application as you normally would but with the inspected widget
highlighted.
Click the inspect icon in bottom left corner of screen to reactivate
select mode.
* Revert "Fix a typo in the saved certificate error message (#11640)"
This reverts commit bfda885a9d.
* Revert "Rollback patch that broke microbenchmarks (#11616)"
This reverts commit 70fe6f4c23.
* Revert "Extract snapshotting logic to Snapshotter class (#11591)"
This reverts commit 309a2d78fb.
* Revert "Minor whitespace formatting fix (#11590)"
This reverts commit bf69c3c69b.
* Revert "Avoid rebuilding snapshots if no change to source (#11551)"
This reverts commit 74835db563.
* Add iOS template
* Android
* Let the engine reset the theme without the activity knowing
* Small tweak
* Replace assets with different vectors
* Let the template hookup have no actual image assets
* Add back placeholder assets with 1px transparent pngs
* Fix drawable xml
* clean up an extraneous line in the storyboard xml
This change re-introduces skipping snapshot builds if input sources (and
outputs) have not changed since the last snapshot build, with a bugfix
to include the entry-point source in the checksum used to check whether
rebuild can be skipped. This ensures that the following sequence
invalidates the cached build, resulting in two snapshot builds:
flutter build ios lib/foo.dart
flutter build ios lib/bar.dart
This reverts commit 3d5afb5a81.
The most recent Flutter IntelliJ plugin replaces FLUTTER_MODULE with
WEB_MODULE and eliminates the exclusion of packages/ directories.
Use of the packages/ directory was turned off by default months ago, and
is replaced by the .packages file.
The output location of gen_snapshot differs based on the engine's target
platform, and we don't know the target platform when building a
platform-independent FLX in JIT mode.
Mainly, this adds documentation to members that were previously
lacking documentation.
It also adds a big block of documentation about improving performance
of widgets.
This also removes some references to package:collection and adds
global setEquals and listEquals methods in foundation that we can use.
(setEquals in particular should be much faster than the
package:collection equivalent, though both should be faster as they
avoid allocating new objects.) All remaining references now qualify
the import so we know what our remaining dependencies are.
Also lots of code reordering in Flutter driver to make the code
consistent and apply the style guide more thoroughly.
This reverts commit e13e7806e3.
Turns out that with this patch, we aren't actually catching all
errors. For example, `flutter analyze --flutter-repo --watch` didn't
report errors in `dev/devicelab/test/adb_test.dart`.
* flutter analyze --watch auto detect if in flutter repo
* move isFlutterLibrary from AnalyzeOnce into AnalyzeBase for use by AnalyzeContinuously
* pass --flutter-repo to analysis server when analyzing the flutter repository
* enhance flutter analyze --watch to summarize public members lacking documentation
In
df8bf384eb
a new functionality of the Dart VM Service Protocol has been introduced.
Clients connected to the Service Protocol are now able to expose
services that other clients (e.g. Observatory) can invoke through the
Service Protocol itself.
With these changes Flutter Tools register them self as a `reloadSources`
(a.k.a. HotReload) capable client.
Observatory is already listening for the clients which expose this
functionality and uses by default the service based version of
`reloadSources` when available, so requesting a HotReload from
Observatory will trigger the full Flutter HotReload.
Related https://github.com/dart-lang/sdk/issues/30023
Related https://github.com/flutter/flutter/pull/11229
Related https://github.com/flutter/flutter/pull/11256
In some cases, we've seen interactions between Instruments and the iOS
simulator that cause hung instruments and DTServiceHub processes. If
enough instances pile up, the host machine eventually becomes
unresponsive.
Until the underlying issue is resolved, manually kill any orphaned
instances (where the parent process has died and PPID is 1) before
launching another instruments run.
Apply a 30 second timeout to Android/iOS device polling.
If there's a device poll already in progress, skip polling for new
devices; wait for the first request to return/timeout.
* Include the process' `stdout` and `stderr` when it returns a
non-zero exit code in `runCheckedAsync()`
* Defensively catch errors in `AndroidDevice.isAppInstalled()`
and return false
* report run target and if it is an emulator
* don't print debug
* rename parameter, remove unused variable
* fix test
* fix comment
* tweak from review, and fix analyzer error
* send custom parameters for the event, not the session
* fix mock
* use the +1 for usage
Previously, the snapshot file was recomputed on every build. We now
record checksums for all snapshot inputs (which are catalogued in the
snapshot dependencies file output alongside the snapshot) and only
rebuild if the checksum for any input file (or the previous output file) has
changed.
Previously, the snapshot file was recomputed on every build. We now
record checksums for all snapshot inputs (which are catalogued in the
snapshot dependencies file output alongside the snapshot) and only
rebuild if the checksum for any input file has changed.
* Only one call to createSnapshot exists, and it's in the same library.
* Eliminate conditional logic around the presence of depfilePath, the
only existing call always passes a non-null depfilePath.
