* Change async stubbing to use thenAnswer.
Mockito now prohibits calling thenReturn with Futures and Streams. dart-lang/mockito#79
* Update all Mockito deps to 3.0.0.
* Revert "Update all Mockito deps to 3.0.0."
This reverts commit e8ab9d37c3.
I did not correctly update the mockito dep, and there's no easy way to update to 3.0 alpha right now.
* Change thenAnswer((_) => to thenAnswer((invocation) =>
* Add Invocation type to thenAnswer lambdas
We now require Xcode 9.0, which ships with the iOS 11 SDK, for iOS
builds. This change does not affect the minimum supported iOS deployment
target, which remains iOS 8.
The iOS 11 SDK adds support for safe area insets, which model the status
bar, iPhone X home indicator, and symmetric horizontal insets to avoid
the iPhone X sensor housing when in landscape mode.
This re-lands flutter/flutter#13608 now that the devicelab Macs have
been updated to Xcode 9.
We now require Xcode 9.0, which ships with the iOS 11 SDK, for iOS
builds. This change does not affect the minimum supported iOS deployment
target, which remains iOS 8.
The iOS 11 SDK adds support for safe area insets, which model the status
bar, iPhone X home indicator, and symmetric horizontal insets to avoid
the iPhone X sensor housing when in landscape mode.
* Revert "Include a directory with Flutter assets (#12944)"
This reverts commit 3af6b9cbf5.
* Revert "Upgrade project.pbxproj to include flutter_assets (#13011)"
This reverts commit 08128cb29b.
* Revert "Upgrade complex_layout project.pbxproj to include flutter_assets (#13544)"
This reverts commit 35f1a04195.
* mark complex_layout_ios__start_up as flaky
We thought it would be OK to call the create command offline-only, but it turns out that isn't a great idea because not all of the create template dependencies are cached by running flutter_tool.
This PR makes it go online by default when running pub get after creating a project, and adds an "--offline" flag to the create command so that offline users can use it offline if their cache is warm.
In order to allow offline usage of the create command we need to be able to tell pub not to try and contact the server to see if new versions are available. Since all the versions that create could want are pinned, it shouldn't need to check for new versions.
Add support for configuring the base storage URL for Flutter's
artifacts. If FLUTTER_STORAGE_BASE_URL is set, use it instead of
storage.googleapis.com.
The pub server can be overridden by setting PUB_HOSTED_URL.
Adds a class `PubContext` with a fixed set of allowed values
Make it clear these values should not be changed casually
Fixed one inconsistency already: update_packages vs update_pkgs
Provide more information for verify calls
Eliminate `ctx_` prefix.
The purpose of this PR is to make it so that when the user runs 'flutter', if they have a .pub-cache directory in their flutter root, we use that instead of the default location for the pub cache. Otherwise, it should act as before.
The eventual goal is to support a pre-populated flutter .zip/.tar.gz file that has everything the developer needs in one bundle. In order for that to actually work, we need to have the pub cache be self-contained, and not in the user's home dir.
Another advantage of this is that if you have multiple flutter repos that you're switching between, then the versions in the pub cache will remain static when you switch between them.
This is an attempt to re-land: #13248. Includes a fix for the test that makes it work on bots in the presence of PUB_CACHE being set, and no other changes.
* Revert "Add tests."
This reverts commit 31bad961ff.
* Revert "Use .pub-cache from Flutter root, if it exists. (#13248)"
This reverts commit 72d6bcc3f7.
It turns out that when a PR build clones the flutter repo, it puts it into a directory called "flutter", and when the "real" build clones the flutter repo, it puts it into a directory called "build". This allowed the tests to succeed in my PR, but fail when I committed it.
This fixes the test so it doesn't depend on the cloned directory name.
The purpose of this PR is to make it so that when the user runs 'flutter', if they have a .pub-cache directory in their flutter root, we use that instead of the default location for the pub cache. Otherwise, it should act as before.
The eventual goal is to support a pre-populated flutter .zip/.tar.gz file that has everything the developer needs in one bundle. In order for that to actually work, we need to have the pub cache be self-contained, and not in the user's home dir.
Another advantage of this is that if you have multiple flutter repos that you're switching between, then the versions in the pub cache will remain static when you switch between them.
Rather than depending on android.googlesource.com for hosting the gradle
wrapper, host our own copy on storage.googleapis.com (along with our
other artifacts).
Also added a script to repackage AOSP's version into ours, in case we
ever need to update it.
Addresses the gradle wrapper part of #11681.
Add support for IOS_SIMULATOR_HOME environment variable in IOSSimulator.logFilePath
flutter_tools can be run on environments where the user's HOME directory
is not the root of the iOS simulators' configs. This change adds support
for such environments by allowing the caller to set the simulator root
directory via an environment variable.
This consolidates all of the non-template .gitignore rules into the top level .gitignore, to ignore common things more broadly, with less maintenance needed for the .gitignore files. Does not touch the templates, so that they still produce needed .gitignores as part of flutter create.
* Add support for NDK discovery and add --prefer-shared-library option
We would like to be able to use native tools (e.g. simpleperf, gdb) with
precompiled flutter apps. The native tools work much better with *.so
files instead of the custom formats the Dart VM uses by default.
The reason for using blobs / instruction snapshots is that we do not
want to force flutter users to install the Android NDK.
This CL adds a `--prefer-shared-library` flag to e.g. `flutter build
apk` which will use the NDK compiler (if available) to turn the
precompiled app assembly file to an `*.so` file. If the NDK compiler is
not available it will default to the default behavior.
* Rebase, add test for NDK detection, augment flutter.gradle with @Input for flag
* Use InMemoryFileSystem for test
* Remove unused import
* Address some analyzer warnings
I got tired of drive-by spelling fixes, so I figured I'd just take care of them all at once.
This only corrects errors in the dartdocs, not regular comments, and I skipped any sample code in the dartdocs. It doesn't touch any identifiers in the dartdocs either. No code changes, just comments.
Previously, we were mapping certain named platforms
(e.g. `android-stable`) to their corresponding version.
this had two problems:
1. The version could become out of date. For instance, we had
mapped `android-stable` to version 24, but the stable version
is now 27.
2. The list of possible named versions wasn't comprehensive.
Some Android SDKs just list the platform as `stable`, or
`experimental`, etc.
This change updates the platform version detection to use
the `build.prop` file that exists in the platform directory
(only for cases where the version number is not encoded into
the directory name).
Creates a new (hidden) flutter command 'ide-config' that will create and/or update
existing .iml files and some files under the .idea directory, as well as
removing existing *.iml files and the .idea directory.
It also:
* Adds *.iml to the .gitignore
* Removes existing .iml files from the repo, and moves them to the
packages/flutter_tools/ide_templates/intellij directory.
* Adds a flag to ide-config ('--update-templates') that will take any new .iml
files in the flutter tree and add them to the existing templates.
- If --overwrite is also specified, then all existing templates will also
be overwritten with the contents from the flutter tree, and any that have
been deleted from the flutter tree will also be removed from the
templates.
* Added new run configurations for all existing app targets that will now also
be automatically added to IntelliJ.
* Setting up the environment also includes setting the coding style guidelines
and the git VCS.
* Note that after this PR lands, Flutter developers will need to run it once to
re-create the .iml files and configuration files that have been removed.
After this PR lands, .iml files will no longer appear in the untracked files
section for git.
If we fail to bind to IPv4 loopback, try IPv6. Some hosts only support IPv6,
causing the test in vmservice_test.dart to fail, since it couldn't find an
available port.
* Get rid of static version methods which ignore the AppContext
* Review comments
* Review Comments
* Make branch behave the same as original implementation
* Fix tests
* tweak the text for the 'elements didnt reload' message
* review comments
* prefix items with a list char
* add a hostIsIde param instead of the isDaemonMode top-level function
* add a trailing comma
* executable.dart#main() depends on runner.dart#run()
* Refactor code such that non-commands don't depend on commands.
No code was actually changed in this PR - code was merely moved from
point A to point B.
Various improvements (in particular a new painting fuzzer) to the text manual test.
Some additional documentation.
A fix to Stack to remove an LTR bias: make unpositioned children apply "alignment".
Some more debugging information on RichText and Text.
A fix to the flutter tool to not crash when an RPC call throws an exception.
Previously, the usage analytics would generate a write to the user's
HOME directory during the Fuchsia build. We're tightening down the
environment in which we run the Fuchsia build, and these writes are now
more obvious.
This patch removes the usage analytics during the Fuchsia build,
avoiding the write to the user's HOME directory.
* fix updrade script; upgrade to the latest package versions
* exclude special dependencies from transitive closure
* fix stack trace handling in flutter_test due to stack_trace change
* change type on _emptyStackTrace
The libimobiledevice suite of tools do not include version information.
A simple way to verify they meet our version requirements is to run
idevice_id -l, which will fail when older versions are run against iOS
devices with newer versions of iOS installed.
Unfortunately, idevice_id -l will also fail when libimobiledevice is up
to date, but the attached devices have never been paired with the host
machine in Xcode.
This patch updates the error message to help guide the user in such
situations.
On iOS 11.0.x ideviceinfo fails with the following message
ERROR: Could not connect to lockdownd, error code -3
This workaround should also work for #12330
This patch also makes it possible to create FLX files with no extension.
Previously, the zip tool would add the ".zip" extension if the output file
lacked an extension.
* Restructure hot mode test so it runs interactively.
This allows to add a benchmark for hot reload after actual source code change.
* Add curly braces, refactory copyRecursive
This reverts commit 5e7bcbacf8.
`flutter run --benchmark` was triggering a different quick bailout path in the VM than `flutter run`. The failure has been fixed upstream.
* Fix restart flow for preview-dart-2 mode.
Restart in preview-dart-2 needs to use kernel file and it has to be complete, rather than incremental kernel file.
* Add curly braces
* Do full compile on restart
* Roll engine to pick up changes to hot reload for preview-dart-2
The initial loading happens on the host, which was building a script snapshot and allowing imports of dart:mirrors. Hot reload happens on the device, which then notices the imports and issues a compile-time error. This change causes programs with imports of dart:mirrors to be rejected during the initial load.
Fixes https://github.com/flutter/flutter/issues/12440
* Add hotReloadInitialDevFSSyncMilliseconds to track how long user have to wait before being able to do first reload.
This stat is significantly different between existing and preview-dart-2 setting (for the latter, this stat is ~3x slower: 13s vs ~4s).
* Remove ws
* Cleanup timer-related code
This reverts commit 90028813a8.
This change caused a few bots to fail with 'JSON-RPC error 110: Extension error', which is odd because _getUnusedChangesInLastReload is not an extension.
This CL introduces 2 hidden options to 'flutter build aot' and 'flutter run' for passing arbitrary arguments to front-end server and to gen_snapshot tool when building and running flutter app in --profile or --release modes.
The ability to pass arbitrary options simplifies various experiments, as it removes the need to change defaults and rebuild flutter engine for every tested configuration.
* Add framework-side support for system text scale factor.
* Rolling engine to e3404b81a53ba3180c7623a6f2190ebb28518f30
Additional changes rolled in with engine change:
libtxt: implementation of GetRectsForRange that processes a line at a time - e3404b8
Provide an entropy source to the Dart engine (#4161) - e1aa867
libtxt: search for fallback fonts that can match emoji and CJK characters - 8061df1
Roll skia to e4679fa06a. (#4157) - 267e7a8
Update buildroot to 53fea9aebb (#4160) - 02ea7ae
Revert engine Dart roll. (#4158) - 14aab33
Add support for system text scale factor. (#4124) - b2a7f4b
Include _http into sky_engine libraries for analyzer (#4154) - b930f10
libtxt: Remove postprocess_line and improve tracking of X offsets - 86f95f0
libtxt: remove redundant line_widths (#4152) - 14bf515
Roll dart to ade37f931e90b0fdb8fe16d6bf6f089545da55b6 (#4151) - 6f1264f
This class lives in the Context and allows callers to "inject"
flag values, where flag values are first extracted from the
command arguments, then from the global arguments as a fallback.
This makes command validation happen as part of `verifyThenRunCommand()`,
using a newly introduced protected method (`validateCommand()`) rather than
a `commandValidator` property (that subclasses were responsible for manually
invoking).
* Pin all dependencies ONCE AND FOR ALL
This replaces the secret `flutter update-packages --upgrade` with a destructive `flutter update-packages --force-upgrade` that actually goes and pins every dependency and transitive dependency in every flutter package to the same version.
* Add comments.
* Allow FloatingActionButton to not have a heroTag.
* Allow FloatingActionButton to not have a child.
* Allow Tooltip to not have a child.
* Improve the debug output of the default FloatingActionButton hero tag.
* Improve the error message in the Hero clashing-tag case.
* Improve the debug output of the Hero widget.
* Improve the debug output of gesture-related widgets.
* Minor improvements to documentation.
* Fix some typos in comments.
* Fix some style nits.
1. Migrate simulator device log tailing to os_log toolchain
2. When the log tag (component) is available (iOS 11/Xcode 9), filter to
the set of log lines with tag 'Flutter'.
As of iOS 11 / Xcode 9, Flutter engine logs are no longer recorded in the
simulator's syslog file, which we previously read using tail -f. Instead
they're now accessible through Apple's new macOS/iOS os_log facility,
via /usr/bin/log, which supports a relatively flexible query language.
When run in non-interactive mode, /usr/bin/log buffers its output in 4k
chunks, which is significantly smaller than what's emitted up to the
point where the observatory/diagnostics port information is logged. As a
workaround we force it to run in interactive mode via the script tool.
* Add --trace-skia parameter to flutter run
Skia tracing is extremely useful for internal debug, but reduces the
amount of space available in the Dart Timeline buffers.
Disable skia tracing by default and expose them via the --trace-skia
flag.
* Roll Engine to 57a1445a45964d386500c39f5e8d06db060abadb
This was introduced to suppress libMobileGestalt noise originating from
libsystem_asl.dylib. Commit 39680ebfbd
suppresses all application log messages not originating from the
app/engine iteself on iOS 10 and above. Since the log message in
question is only emitted on devices running iOS >= 10.3.0, this
blacklist no longer necessary.
On iOS 10 and above, suppress engine log messages from system components
other than Flutter. This eliminates a large amount of keyboard/plugin
related noise during edit-refresh development.
Checksum validation is intended only as a performance improvement.
Checksum de-serialization errors (typically framework version mismatch) are
expected on framework updates and shouldn't be user-visible except for
informational purposes when --verbose is set.
ios-deploy 1.9.2 includes fixes for a common source of Xcode breakage
(flutter/flutter#4326) with Xcode 8.3.3 + iOS 10.3.3, and is required to
to support Xcode 9 (flutter/flutter#11875).
Opening Xcode is no longer sufficient to enable develop mode in Xcode 9.
Update the message to run the command-line tool. Alternatively users can
launch an app in the Xcode debugger to do this.
Adds the app entrypoint as a key in the checksum file.
This change eliminates the assumption that checksummed files change when
the main entrypoint changes. In the case where there are two
entrypoints, a.dart and b.dart and a.dart imports b.dart and b.dart
imports a.dart, building the app with entrypoint a.dart followed by a
build of the app with entrypoint b.dart would result in the same
files list and checksums, but should invalidate the build.
Fix a test for build invalidation due to a change in main entry point.
Previously this test's build was always invalidated to the the lack of a
previous snapshot (as well as the change in checksums). This change
ensures that the build is invalidated only due to the change in
checksums.
This patch migrates iOS device listing from using Xcode instruments to
using the libimobiledevice tools idevice_id and ideviceinfo.
ideviceinfo was previously incompatible with iOS 11 physical devices;
this has now been fixed.
In 37bb5f1300 flutter_tools migrated from
libimobiledevice-based device listing on iOS to using Xcode instruments
to work around the lack of support for iOS 11. Using instruments entails
several downsides, including a significantly higher performance hit, and
leaking hung DTServiceHub processes in certain cases when a simulator is
running, necessitating workarounds in which we watched for, and cleaned
up leaked DTServiceHub processes. This patch returns reverts the move to
instruments now that it's no longer necessary.
Extract a Snapshotter class that can be shared between FLX snapshotting,
AOT snapshotting, and assembly AOT snapshotting. Allows for better
testability of snapshotting logic.
* Extracts script snapshotting used in FLX build.
* Adds tests for snapshot checksumming, build invalidation/skipping.
Remaining work: disentangle + extract AOT snapshotting and Assembly AOT
snapshotting logic from build_aot.dart.
This change re-introduces skipping AOT snapshot builds if input sources
and outputs have not changed since the last snapshot build, assuming a
build for the same platform in the same build mode.
This reverts commit 3d5afb5a81.
It includes the following changes relative to the original:
1. Include the entrypoint source in the checksums
2. include the build mode in the checksums
3. include the target platform in the checksums
This change ensures that snapshot build checksums used to avoid
duplicate builds are invalidated by a change to framework revision
(in case gen_snapshot is updated), as well as by build mode.
Currently, only FLX snapshotting uses checksums to avoid duplicate
builds. FLX snapshotting is always done with BuildMode.debug, so didn't
include build mode in the checksum file.
During FLX snapshotting, changes to (or absence of) any of the following
should trigger re-snapshot:
1. main() entrypoint source
2. transitive closure of sources reachable from the entrypoint source
3. the output snapshot
This patch supports basic filtering of log lines from physical iOS
devices, similar to existing functionality for iOS simulator logging.
This patch also suppresses the following two log messages which are
emitted at app startup on iOS 10.3 devices:
libMobileGestalt MobileGestaltSupport.m:153: pid 123 (Runner) does not have sandbox access for frZQaeyWLUvLjeuEK43hmg and IS NOT appropriately entitled
libMobileGestalt MobileGestalt.c:550: no access to InverseDeviceID (see <rdar://problem/11744455>)
Allows the user to specify the kind of project to create. The default is 'app'. Other choices are 'plugin' (the old '--plugin' behavior), and 'package'.
A Flutter 'package' is a Dart package that depends on Flutter, but does not contain native code.
Fixes#10377.
Bare bones widget inspector support.
Toggle the widget inspector from the flutter tool by pressing 'i'.
When the widget inspector is select mode:
Pointer down to to inspect a widget.
Pointer click to finalize selection of a widget. You can now interact
with the application as you normally would but with the inspected widget
highlighted.
Click the inspect icon in bottom left corner of screen to reactivate
select mode.
* Revert "Fix a typo in the saved certificate error message (#11640)"
This reverts commit bfda885a9d.
* Revert "Rollback patch that broke microbenchmarks (#11616)"
This reverts commit 70fe6f4c23.
* Revert "Extract snapshotting logic to Snapshotter class (#11591)"
This reverts commit 309a2d78fb.
* Revert "Minor whitespace formatting fix (#11590)"
This reverts commit bf69c3c69b.
* Revert "Avoid rebuilding snapshots if no change to source (#11551)"
This reverts commit 74835db563.
* Add iOS template
* Android
* Let the engine reset the theme without the activity knowing
* Small tweak
* Replace assets with different vectors
* Let the template hookup have no actual image assets
* Add back placeholder assets with 1px transparent pngs
* Fix drawable xml
* clean up an extraneous line in the storyboard xml
This change re-introduces skipping snapshot builds if input sources (and
outputs) have not changed since the last snapshot build, with a bugfix
to include the entry-point source in the checksum used to check whether
rebuild can be skipped. This ensures that the following sequence
invalidates the cached build, resulting in two snapshot builds:
flutter build ios lib/foo.dart
flutter build ios lib/bar.dart
This reverts commit 3d5afb5a81.
The most recent Flutter IntelliJ plugin replaces FLUTTER_MODULE with
WEB_MODULE and eliminates the exclusion of packages/ directories.
Use of the packages/ directory was turned off by default months ago, and
is replaced by the .packages file.
The output location of gen_snapshot differs based on the engine's target
platform, and we don't know the target platform when building a
platform-independent FLX in JIT mode.
Mainly, this adds documentation to members that were previously
lacking documentation.
It also adds a big block of documentation about improving performance
of widgets.
This also removes some references to package:collection and adds
global setEquals and listEquals methods in foundation that we can use.
(setEquals in particular should be much faster than the
package:collection equivalent, though both should be faster as they
avoid allocating new objects.) All remaining references now qualify
the import so we know what our remaining dependencies are.
Also lots of code reordering in Flutter driver to make the code
consistent and apply the style guide more thoroughly.
This reverts commit e13e7806e3.
Turns out that with this patch, we aren't actually catching all
errors. For example, `flutter analyze --flutter-repo --watch` didn't
report errors in `dev/devicelab/test/adb_test.dart`.
* flutter analyze --watch auto detect if in flutter repo
* move isFlutterLibrary from AnalyzeOnce into AnalyzeBase for use by AnalyzeContinuously
* pass --flutter-repo to analysis server when analyzing the flutter repository
* enhance flutter analyze --watch to summarize public members lacking documentation
In
df8bf384eb
a new functionality of the Dart VM Service Protocol has been introduced.
Clients connected to the Service Protocol are now able to expose
services that other clients (e.g. Observatory) can invoke through the
Service Protocol itself.
With these changes Flutter Tools register them self as a `reloadSources`
(a.k.a. HotReload) capable client.
Observatory is already listening for the clients which expose this
functionality and uses by default the service based version of
`reloadSources` when available, so requesting a HotReload from
Observatory will trigger the full Flutter HotReload.
Related https://github.com/dart-lang/sdk/issues/30023
Related https://github.com/flutter/flutter/pull/11229
Related https://github.com/flutter/flutter/pull/11256
In some cases, we've seen interactions between Instruments and the iOS
simulator that cause hung instruments and DTServiceHub processes. If
enough instances pile up, the host machine eventually becomes
unresponsive.
Until the underlying issue is resolved, manually kill any orphaned
instances (where the parent process has died and PPID is 1) before
launching another instruments run.
Apply a 30 second timeout to Android/iOS device polling.
If there's a device poll already in progress, skip polling for new
devices; wait for the first request to return/timeout.
* Include the process' `stdout` and `stderr` when it returns a
non-zero exit code in `runCheckedAsync()`
* Defensively catch errors in `AndroidDevice.isAppInstalled()`
and return false
* report run target and if it is an emulator
* don't print debug
* rename parameter, remove unused variable
* fix test
* fix comment
* tweak from review, and fix analyzer error
* send custom parameters for the event, not the session
* fix mock
* use the +1 for usage
Previously, the snapshot file was recomputed on every build. We now
record checksums for all snapshot inputs (which are catalogued in the
snapshot dependencies file output alongside the snapshot) and only
rebuild if the checksum for any input file (or the previous output file) has
changed.
Previously, the snapshot file was recomputed on every build. We now
record checksums for all snapshot inputs (which are catalogued in the
snapshot dependencies file output alongside the snapshot) and only
rebuild if the checksum for any input file has changed.
* Only one call to createSnapshot exists, and it's in the same library.
* Eliminate conditional logic around the presence of depfilePath, the
only existing call always passes a non-null depfilePath.
Remove terminating semicolons; they are causing an "code inspection warning" in Android Studio:
```
This inspection reports redundant semicolon (';') token which is not required in Kotlin and may be removed.
```
Previously, xcodeMajorVersion and xcodeMinorVersion returned null unless
xcodeVersionSatisfactory had been called first. We now compute them on
demand, and cache the resultant values.
The main purpose of this PR is to make it so that when you set the
initial route and it's a hierarchical route (e.g. `/a/b/c`), it
implies multiple pushes, one for each step of the route (so in that
case, `/`, `/a`, `/a/b`, and `/a/b/c`, in that order). If any of those
routes don't exist, it falls back to '/'.
As part of doing that, I:
* Changed the default for MaterialApp.initialRoute to honor the
actual initial route.
* Added a MaterialApp.onUnknownRoute for handling bad routes.
* Added a feature to flutter_driver that allows the host test script
and the device test app to communicate.
* Added a test to make sure `flutter drive --route` works.
(Hopefully that will also prove `flutter run --route` works, though
this isn't testing the `flutter` tool's side of that. My main
concern is over whether the engine side works.)
* Fixed `flutter drive` to output the right target file name.
* Changed how the stocks app represents its data, so that we can
show a page for a stock before we know if it exists.
* Made it possible to show a stock page that doesn't exist. It shows
a progress indicator if we're loading the data, or else shows a
message saying it doesn't exist.
* Changed the pathing structure of routes in stocks to work more
sanely.
* Made search in the stocks app actually work (before it only worked
if we happened to accidentally trigger a rebuild). Added a test.
* Replaced some custom code in the stocks app with a BackButton.
* Added a "color" feature to BackButton to support the stocks use case.
* Spaced out the ErrorWidget text a bit more.
* Added `RouteSettings.copyWith`, which I ended up not using.
* Improved the error messages around routing.
While I was in some files I made a few formatting fixes, fixed some
code health issues, and also removed `flaky: true` from some devicelab
tests that have been stable for a while. Also added some documentation
here and there.
This allows us to take advantage of improved command-line tooling (e.g.,
improvements in device listing in Instruments). Now that the engine is
built with Xcode 8 and the framework is tested against Xcode 8, this
reduces the set of configurations we need to support to allow us to
focus on the supported ones: Xcode 8 and Xcode 9.
Going forward, Android support libraries are published on maven (instead of bundling them with the SDK). Many plugins depend on these. To avoid requiring plugin users to add the maven repository to their app this change adds the repository to the template for `flutter create`.
This also bumps the support-annotations dependency to 25.4.0 (which also requires the new maven repository).
This reverts commit b2909a245a.
This resubmits the following patches:
1. Use Xcode instruments to list devices (#10801)
Eliminates the dependency on idevice_id from libimobiledevice. Instead,
uses Xcode built-in functionality.
2. Make device discovery asynchronous (#10803)
Migrates DeviceDiscovery.devices and all device-specific lookup to be
asynchronous.
* Revert "Make device discovery asynchronous (#10803)"
This reverts commit 972be9c8b4.
* Revert "Use Xcode instruments to list devices (#10801)"
This reverts commit 37bb5f1300.
This is to resolve a failure that looks related to a bad install of Xcode 8.0
on our build bots and should be reinstated when the infra issue is diagnosed
and resolved.
Instruments worked well when this was originally landed, and on the
following commit, but started failing two commits after this originally
landed. Manual invocation of instruments on the build host currently
results in:
```
dyld: Library not loaded: @rpath/InstrumentsAnalysisCore.framework/Versions/A/InstrumentsAnalysisCore
Referenced from: /Applications/Xcode8.0.app/Contents/Developer/usr/bin/instruments
Reason: image not found
Abort trap: 6
```
It appears the /Applications/Xcode8.0.app/Contents/Applications
directory (which contains Instruments) is missing on the host.
Moves all remaining calls to tools that are part of the libimobiledevice
suite of tools to the IMobileDevice class. This allows for better
tracking of this dependency, and easier mocking in tests.
Use a top-level getter in mac.dart rather than a static instance getter
and a top-level getter in ios_workflow.dart. Makes this code consistent
with how we do context lookups elsewhere.
Extract out IMobileDevice class, move class to idevice_id, ideviceinfo
(and eventually other libimobiledevice tools such as iproxy) behind this
interface.
Add tests for the case where libimobiledevice is not installed, the case
where it returns no devices, and the case where it returns device IDs.
